From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Wed, 25 Aug 2004 21:25:20 +0200 (MEST) From: "Patrick Huesmann" To: Scott Anderson Cc: linuxppc-embedded@lists.linuxppc.org MIME-Version: 1.0 References: <412CE415.6010201@mvista.com> Subject: Re: ppc-linux still not booting on my virtexII board Message-ID: <32289.1093461920@www26.gmx.net> Content-Type: text/plain; charset="us-ascii" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, > You should probably invalidate the cache before you flush it. There is > code to do this for the ML300. Search for "mfdccr" in: > > http://ppc.bkbits.net:8080/linuxppc-2.4/anno/arch/ppc/boot/simple/embed_config.c@1.24?nav=index.html|src/|src/arch|src/arch/ppc|src/arch/ppc/boot|src/arch/ppc/boot/simple > Thanks. After digging in the data sheets, I noticed that the address where the access fails (0x000931c0) is a boundary between cache lines. Don't know if that means something, though. Regards, Patrick -- NEU: Bis zu 10 GB Speicher für e-mails & Dateien! 1 GB bereits bei GMX FreeMail http://www.gmx.net/de/go/mail ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/