From: "federicosibilio@tiscali.it" <federicosibilio@tiscali.it>
To: linuxppc-embedded@ozlabs.org
Subject: Installing u-boot on sbc8260 via ethernet using minicom
Date: Tue, 7 Nov 2006 14:38:28 +0100 (CET) [thread overview]
Message-ID: <32912319.1162906708248.JavaMail.root@ps8> (raw)
i've tryed to install u-boot using minicom, but i'm not able to=20
configure in shell boot params,=20
using this...
boot device : motfcc
unit number : 0
processor number : 0
host name : motfcc0
inet on ethernet (e) : 192.168.0.4
inet on backplane (b): 192.168.0.4
host inet (h) : 192.168.0.3
gateway inet (g) : 192.168.0.3
flags (f) : 0x80
target name (tn) : sbc8260
when i reboot target it appears in minicom the message below:
AT S7=3D45 S0=3D0 L1 V1 X4 &c1 E1 Q0
0x1f058b0 (tBoot): miiPhyInit check cable connection
Attached TCP/IP interface to motfcc0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... Erroneous header read
Error loading file: errno =3D 0x610001.
Can't load boot file!!
=C3=BC
my questions are?
what file must i put into target?(u-boot.bin?)
in which way can i upload it?(using tftp with 192.168.0.4 and using=20
put command, it gives timeout for transmission, but ping to=20
192.168.0.3=20
works normally until in minicom appears error message)
Please help me to configure and install u-boot
thanks very much!!!
Naviga e telefona senza limiti con Tiscali =20
Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom
http://abbonati.tiscali.it/adsl/
reply other threads:[~2006-11-07 13:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32912319.1162906708248.JavaMail.root@ps8 \
--to=federicosibilio@tiscali.it \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.