From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Andreas Nagel <andreasnagel@gmx.net>
Cc: linux-media@vger.kernel.org
Subject: Re: Integrate camera interface of OMAP3530 in Angstrom Linux
Date: Mon, 01 Oct 2012 16:08:50 +0200 [thread overview]
Message-ID: <3292965.2Sq8LgAABn@avalon> (raw)
In-Reply-To: <5069958E.3090407@gmx.net>
Hi Andreas,
On Monday 01 October 2012 15:07:26 Andreas Nagel wrote:
> Hi Laurent,
>
> thanks for your reply.
>
> Using a current mainline kernel is a little problematic. Recently I
> compiled the 2.6.39 and it wasn't able to boot at all. The reason for
> this are probably the chips, that are built on the CPU module. Usually,
> a working kernel for this module was undergoing some modifications by
> Technexion because of these chips.
That's why vendors should push board support to the mainline kernel.
> Currently, Technexion only offers the 2.6.32. and 2.6.37 kernel. The
> latter one makes a new device node /dev/media0 available (after
> activating some 'experimental' marked options in the kernel config), but
> I wasn't able to capture any signal.
>
> I'm going to try the latest mainline kernel, but I doubt it will work.
Probably not out of the box, you will likely have to port board support from
the vendor-specific kernel to mainline.
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2012-10-01 14:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 18:00 Integrate camera interface of OMAP3530 in Angstrom Linux Andreas Nagel
2012-09-26 11:41 ` Laurent Pinchart
2012-10-01 13:07 ` Andreas Nagel
2012-10-01 14:08 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3292965.2Sq8LgAABn@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=andreasnagel@gmx.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.