From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Frank Li <Frank.li@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/7] ARM: dts: ls1021a-tqmals1021a: Add LVDS overlay for Tianma TM070JVGH33
Date: Thu, 27 Mar 2025 16:17:09 +0100 [thread overview]
Message-ID: <3347513.aeNJFYEL58@steina-w> (raw)
In-Reply-To: <Z+VoEI9Ep3izRKBJ@lizhi-Precision-Tower-5810>
Hi Frank,
Am Donnerstag, 27. März 2025, 16:00:32 CET schrieb Frank Li:
> On Thu, Mar 27, 2025 at 03:41:10PM +0100, Alexander Stein wrote:
> > This adds an overlay for the supported LVDS display tianma tm070jvhg33.
> > The on-board RGB-to-LVDS encoder and DCU graphics chain are configured
> > accordingly. Add the missing power supply as well.
>
> ^^^ missed?
Thanks for the comment. We are touching English grammar here and I might
be completely wrong.
IMHO this gerund is describing the power supply is missing the whole time.
In contrast to 'missed' which indicates it had been missed (just) once.
Anyway I don't have hard feelings.
Best regards,
Alexander
> >
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> > arch/arm/boot/dts/nxp/ls/Makefile | 2 +
> > ...tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso | 47 +++++++++++++++++++
> > .../nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts | 1 +
> > 3 files changed, 50 insertions(+)
> > create mode 100644 arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
> >
> > diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile
> > index 225a7665b8ad1..7f96de6f80224 100644
> > --- a/arch/arm/boot/dts/nxp/ls/Makefile
> > +++ b/arch/arm/boot/dts/nxp/ls/Makefile
> > @@ -8,4 +8,6 @@ dtb-$(CONFIG_SOC_LS1021A) += \
> > ls1021a-twr.dtb
> >
> > ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
> > +ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
> > dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
> > +dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
> > diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
> > new file mode 100644
> > index 0000000000000..e9708f3c67403
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
> > @@ -0,0 +1,47 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> > +/*
> > + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> > + * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
> > + * D-82229 Seefeld, Germany.
> > + * Author: Alexander Stein
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&backlight_dcu {
> > + status = "okay";
> > +};
> > +
> > +&dcu {
> > + status = "okay";
> > +
> > + port {
> > + dcu_out: endpoint {
> > + remote-endpoint = <&lvds_encoder_in>;
> > + };
> > + };
> > +};
> > +
> > +&display {
> > + compatible = "tianma,tm070jvhg33";
> > + status = "okay";
> > +};
> > +
> > +&lvds_encoder {
> > + status = "okay";
> > +};
> > +
> > +&lvds_encoder_in {
> > + remote-endpoint = <&dcu_out>;
> > +};
> > +
> > +&lvds_encoder_out {
> > + remote-endpoint = <&panel_in>;
> > +};
> > +
> > +&panel_in {
> > + remote-endpoint = <&lvds_encoder_out>;
> > +};
> > diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
> > index 27a55fa638128..80dae0c09542d 100644
> > --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
> > +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
> > @@ -147,6 +147,7 @@ hdmi_in: endpoint {
> > display: panel {
> > backlight = <&backlight_dcu>;
> > enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
> > + power-supply = <®_3p3v>;
> > status = "disabled";
> >
> > port {
> > --
> > 2.43.0
> >
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2025-03-27 15:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-27 14:41 [PATCH 0/7] TQMLS102xA: New display overlays and small fixes Alexander Stein
2025-03-27 14:41 ` [PATCH 1/7] ARM: dts: ls1021a-tqmals1021a: Fix license Alexander Stein
2025-03-27 14:56 ` Frank Li
2025-03-27 14:41 ` [PATCH 2/7] ARM: dts: ls1021a-tqmals1021a: Add vcc-supply for spi-nor Alexander Stein
2025-03-27 14:56 ` Frank Li
2025-03-27 14:41 ` [PATCH 3/7] ARM: dts: ls1021a-tqmals1021a: Add HDMI overlay Alexander Stein
2025-03-27 14:58 ` Frank Li
2025-03-27 14:41 ` [PATCH 4/7] ARM: dts: ls1021a-tqmals1021a: Add LVDS overlay for Tianma TM070JVGH33 Alexander Stein
2025-03-27 15:00 ` Frank Li
2025-03-27 15:17 ` Alexander Stein [this message]
2025-03-27 15:25 ` Frank Li
2025-03-27 14:41 ` [PATCH 5/7] ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech FC21 RGB display Alexander Stein
2025-03-27 15:02 ` Frank Li
2025-03-27 14:41 ` [PATCH 6/7] ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech DC44 " Alexander Stein
2025-03-27 15:03 ` Frank Li
2025-03-27 14:41 ` [PATCH 7/7] ARM: dts: ls1021a-tqmals1021a: change sound card model name Alexander Stein
2025-03-27 15:05 ` Frank Li
2025-03-27 14:54 ` [PATCH 0/7] TQMLS102xA: New display overlays and small fixes Frank Li
2025-03-27 15:14 ` Alexander Stein
2025-03-27 15:21 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3347513.aeNJFYEL58@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.