From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: linux-omap@vger.kernel.org, tony@atomide.com, sre@kernel.org,
pali.rohar@gmail.com, linux-media@vger.kernel.org
Subject: Re: [PATCH 2/4] dt: bindings: Add bindings for omap3isp
Date: Mon, 16 Mar 2015 02:14:07 +0200 [thread overview]
Message-ID: <3350721.RUNgWzh7DN@avalon> (raw)
In-Reply-To: <1426464080-29119-3-git-send-email-sakari.ailus@iki.fi>
Hi Sakari,
Thank you for the patch.
On Monday 16 March 2015 02:01:18 Sakari Ailus wrote:
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
> .../devicetree/bindings/media/ti,omap3isp.txt | 71 +++++++++++++++++
> MAINTAINERS | 1 +
> include/dt-bindings/media/omap3-isp.h | 22 ++++++
> 3 files changed, 94 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/ti,omap3isp.txt
> create mode 100644 include/dt-bindings/media/omap3-isp.h
>
> diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> b/Documentation/devicetree/bindings/media/ti,omap3isp.txt new file mode
> 100644
> index 0000000..547b493
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> @@ -0,0 +1,71 @@
> +OMAP 3 ISP Device Tree bindings
> +===============================
> +
> +The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
> +
> +Required properties
> +===================
> +
> +compatible : must contain "ti,omap3-isp"
> +
> +reg : the two registers sets (physical address and length) for the
> + ISP. The first set contains the core ISP registers up to
> + the end of the SBL block. The second set contains the
> + CSI PHYs and receivers registers.
> +interrupts : the ISP interrupt specifier
> +iommus : phandle and IOMMU specifier for the IOMMU that serves the ISP
> +syscon : the phandle and register offset to the Complex I/O or CSI-PHY
> + register
> +ti,phy-type : 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
> + 1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
> +#clock-cells : Must be 1 --- the ISP provides two external clocks,
> + cam_xclka and cam_xclkb, at indices 0 and 1,
> + respectively. Please find more information on common
> + clock bindings in ../clock/clock-bindings.txt.
> +
> +Port nodes (optional)
> +---------------------
> +
> +More documentation on these bindings is available in
> +video-interfaces.txt in the same directory.
> +
> +reg : The interface:
> + 0 - parallel (CCDC)
> + 1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
> + CSI1 -- CSIb on 3430
> + 2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
> + CSI2 -- CSIa on 3430
> +
> +Optional properties
> +===================
> +
> +vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
> +vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
> +
> +Endpoint nodes
> +--------------
> +
> +lane-polarity : lane polarity (required on CSI-2)
> + 0 -- not inverted; 1 -- inverted
> +data-lanes : an array of data lanes from 1 to 3. The length can
> + be either 1 or 2. (required on CSI-2)
> +clock-lanes : the clock lane (from 1 to 3). (required on CSI-2)
> +
> +
> +Example
> +=======
> +
> + isp@480bc000 {
> + compatible = "ti,omap3-isp";
> + reg = <0x480bc000 0x12fc
> + 0x480bd800 0x0600>;
> + interrupts = <24>;
> + iommus = <&mmu_isp>;
> + syscon = <&omap3_scm_general 0x2f0>;
> + ti,phy-type = <1>;
I would use OMAP3ISP_PHY_TYPE_CSIPHY instead of 1 here. Apart from that,
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + #clock-cells = <1>;
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index af8df65..a102624 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6949,6 +6949,7 @@ OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
> M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> L: linux-media@vger.kernel.org
> S: Maintained
> +F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
> F: drivers/media/platform/omap3isp/
> F: drivers/staging/media/omap4iss/
>
> diff --git a/include/dt-bindings/media/omap3-isp.h
> b/include/dt-bindings/media/omap3-isp.h new file mode 100644
> index 0000000..b18c60e
> --- /dev/null
> +++ b/include/dt-bindings/media/omap3-isp.h
> @@ -0,0 +1,22 @@
> +/*
> + * include/dt-bindings/media/omap3-isp.h
> + *
> + * Copyright (C) 2015 Sakari Ailus
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#ifndef __DT_BINDINGS_OMAP3_ISP_H__
> +#define __DT_BINDINGS_OMAP3_ISP_H__
> +
> +#define OMAP3ISP_PHY_TYPE_COMPLEX_IO 0
> +#define OMAP3ISP_PHY_TYPE_CSIPHY 1
> +
> +#endif /* __DT_BINDINGS_OMAP3_ISP_H__ */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2015-03-16 0:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 0:01 [PATCH 0/4] OMAP 3 ISP (and N9/N950 primary camera support) dts changes Sakari Ailus
2015-03-16 0:01 ` [PATCH 1/4] arm: dts: omap3: Extend the syscon register range Sakari Ailus
2015-03-16 0:16 ` Laurent Pinchart
2015-03-16 0:01 ` [PATCH 2/4] dt: bindings: Add bindings for omap3isp Sakari Ailus
2015-03-16 0:14 ` Laurent Pinchart [this message]
2015-03-16 0:01 ` [PATCH 3/4] arm: dts: omap3: Add DT entries for OMAP 3 Sakari Ailus
2015-03-16 0:12 ` Laurent Pinchart
2015-03-16 0:01 ` [PATCH 4/4] arm: dts: n950, n9: Add primary camera support Sakari Ailus
2015-03-16 0:12 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3350721.RUNgWzh7DN@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sakari.ailus@iki.fi \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.