Re: [PATCH] iio: st_lsm6dsx: Replace scnprintf with sysfs_emit

[akshay bansod <akbansd@gmail.com>]

On Wednesday, 2 July 2025 8:25 pm +0530 David Lechner wrote:
> On 7/2/25 8:58 AM, Akshay Bansod wrote:
> > Update the sysfs interface for sampling frequency and scale attributes.
> > Replace `scnprintf()` with `sysfs_emit_at()` which is PAGE_SIZE-aware
> > and recommended for use in sysfs.
> > 
> > Signed-off-by: Akshay Bansod <akbansd@gmail.com>
> > ---
> > 
> > Testing:
> > - Built the driver (`st_lsm6dsx_i2c`) as a module.
> > - Tested using `i2c-stub` to mock the device.
> > - Verified that reading sysfs attributes like `sampling_frequency_available`
> >   works correctly and shows no change in functionality.
> 
> Nice to see it was actually tested. :-)
> 
:-)
> > 
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index c65ad4982..1cef10919 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -2035,7 +2035,7 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
> >  
> >  	odr_table = &sensor->hw->settings->odr_table[sensor->id];
> >  	for (i = 0; i < odr_table->odr_len; i++)
> > -		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
> > +		len += sysfs_emit_at(buf, len, "%d.%03d ",
> >  				 odr_table->odr_avl[i].milli_hz / 1000,
> >  				 odr_table->odr_avl[i].milli_hz % 1000);
> 
> Let's keep checkpatch happy and change the indent of the wrapped lines to
> line up with ( since the ( moved.
> 
noted. I wasn't aware of that.
> >  	buf[len - 1] = '\n';
> > @@ -2054,7 +2054,7 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
> >  
> >  	fs_table = &hw->settings->fs_table[sensor->id];
> >  	for (i = 0; i < fs_table->fs_len; i++)
> > -		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ",
> > +		len += sysfs_emit_at(buf, len, "0.%09u ",
> >  				 fs_table->fs_avl[i].gain);
> 
> ditto
> 
noted.
> >  	buf[len - 1] = '\n';
> >  
> 
> 

Thanks for the review. I'll revise the patch.

Regards,
Akshay