From: Suman Pandit <suman.p@nuevonetwork.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath9k getting crashed
Date: Tue, 29 Oct 2013 14:34:17 +0530 [thread overview]
Message-ID: <339f6851$1fa30a91$10757195$@com> (raw)
Hi There,
I have build ath9k module for powerpc and it is running successfully.But
some time it is getting crashed and system is restarting,I do not know what
the problem is happening.Here is the debug messege i am getting from
system.
NIP: f1b6f980 LR: f1b6fae8 CTR: c04b19a8
REGS: effe7dd0 TRAP: 0700 Not tainted (2.6.35)
MSR: 00029000 <EE,ME,CE> CR: 22002882 XER: 00000000
TASK = ef3c9bc0[1508] 'hostapd' THREAD: eed4a000 CPU: 1
GPR00: 00000001 effe7e80 ef3c9bc0 00000000 eee1b818 00000000 00000000
00000000
GPR08: 008a2000 ef086ca0 ef3d0120 00000001 42008884 100994f0 00000000
10003a10
GPR16: c0742d00 c08460cc c0879060 00000000 ef3d2524 000619fd 00000000
00000000
GPR24: ef3d1780 ef3d4000 ef3d0ae0 ef3d4000 eee1b818 00000000 eee1b8b0
ef3d1780
interface=wlan0
driver=nl80211
hw_mode=g
channel=6
ignore_broadcast_ssid=1
bssid=02:54:b2:40:17:10
Unable to handle kernel paging request for data at address 0x00000002
Faulting instruction address: 0xc00baf18
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2 P1020 RDB
last sysfs file:
Modules linked in: ath9k mac80211 ath9k_common ath9k_hw ath cfg80211
compat
NIP: c00baf18 LR: c00baec4 CTR: 00000000
REGS: effe7980 TRAP: 0300 Tainted: G W (2.6.35)
MSR: 00021000 <ME,CE> CR: 24242044 XER: 20000000
DEAR: 00000002, ESR: 00000000
TASK = ef83c940[0] 'swapper' THREAD: ef842000 CPU: 1
GPR00: 00000000 effe7a30 ef83c940 c0889690 00000020 c05bd9e8 ffffffff
c10e0fb8
GPR08: 0077dc8c c088a730 008a2000 c083efb8 44242042 00000000 ef3d406e
ef3d406a
GPR16: 00000003 00000001 effe7b68 ffffffff ef0650a0 00000000 00000080
00000020
GPR24: 000000d0 00000018 ef3b3700 c05bd9e8 00000020 00029000 c0889690
00000002
NIP [c00baf18] __kmalloc_track_caller+0x78/0x130
LR [c00baec4] __kmalloc_track_caller+0x24/0x130
Call Trace:dcast_ssid=0
[effe7a50] [c04a6730] __alloc_skb+0x64/0x124
[effe7a70] [c05bd9e8] inet6_rt_notify+0x5c/0x120
[effe7ab0] [c05c1890] fib6_add+0x33c/0x5ec
[effe7b40] [c05beaa0] __ip6_ins_rt+0x38/0x5c
[effe7b60] [c05bf46c] ip6_ins_rt+0x2c/0x3c
[effe7b80] [c05bfbc8] ip6_pol_route+0x25c/0x2f4
[effe7be0] [c05c010c] fib6_rule_lookup+0x24/0x34
[effe7bf0] [c05be7b0] ip6_route_input+0x110/0x158
[effe7c80] [c05b4eec] ipv6_rcv+0x49c/0x4a8
[effe7cb0] [c04aea70] __netif_receive_skb+0x3c4/0x53c
[effe7cf0] [c04af9ec] netif_receive_skb+0xac/0xc0
[effe7d20] [f1b21160] ieee80211_sta_ps_transition+0x100/0x2fd8 [mac80211]
[effe7d40] [f1b22098] ieee80211_sta_ps_transition+0x1038/0x2fd8 [mac80211]
[effe7dc0] [f1b238f0] ieee80211_sta_ps_transition+0x2890/0x2fd8 [mac80211]
[effe7e00] [f1b24748] ieee80211_rx+0x710/0x7b8 [mac80211]
[effe7e60] [f1b75860] ath_rx_tasklet+0xa88/0xfbc [ath9k]
[effe7f50] [f1b74ac8] ath9k_tasklet+0xfc/0x148 [ath9k]
[effe7f70] [c004bd04] tasklet_action+0xbc/0x194
[effe7fa0] [c004ccf4] __do_softirq+0xe8/0x170
[effe7ff0] [c0010270] call_do_softirq+0x14/0x24
[ef843e70] [c0004b08] do_softirq+0xb0/0xc4
[ef843e90] [c004ca88] irq_exit+0x94/0xb4
[ef843ea0] [c0004d8c] do_IRQ+0xfc/0x19c
[ef843ed0] [c0010f64] ret_from_except+0x0/0x18
--- Exception: 501 at cpu_idle+0x108/0x160
LR = cpu_idle+0x108/0x160
[ef843f90] [c0008a00] cpu_idle+0x60/0x160 (unreliable)
[ef843fb0] [c0637108] start_secondary+0x310/0x328
[ef843ff0] [c0001d00] __secondary_start+0x30/0x84
Instruction dump:
54290024 81630000 80090008 3d20c089 3929a730 5400103a 7d49002e 7feb502e
7ceb5214 2f9f0000 419e0080 80030010 <7d3f002e> 7d2b512e 73a08000 41820044
Kernel panic - not syncing: Fatal exception in interrupt
Call Trace:
[effe78b0] [c00078a4] show_stack+0x4c/0x178 (unreliable)
[effe78f0] [c0633d34] panic+0xa8/0x134
[effe7940] [c000dda8] die+0x1c8/0x1d4
[effe7960] [c0014978] bad_page_fault+0x98/0xd8
[effe7970] [c0010dbc] handle_page_fault+0x7c/0x80
--- Exception: 300 at __kmalloc_track_caller+0x78/0x130
LR = __kmalloc_track_caller+0x24/0x130
[effe7a30] [00000000] (null) (unreliable)
[effe7a50] [c04a6730] __alloc_skb+0x64/0x124
[effe7a70] [c05bd9e8] inet6_rt_notify+0x5c/0x120
[effe7ab0] [c05c1890] fib6_add+0x33c/0x5ec
[effe7b40] [c05beaa0] __ip6_ins_rt+0x38/0x5c
[effe7b60] [c05bf46c] ip6_ins_rt+0x2c/0x3c
[effe7b80] [c05bfbc8] ip6_pol_route+0x25c/0x2f4
[effe7be0] [c05c010c] fib6_rule_lookup+0x24/0x34
[effe7bf0] [c05be7b0] ip6_route_input+0x110/0x158
[effe7c80] [c05b4eec] ipv6_rcv+0x49c/0x4a8
[effe7cb0] [c04aea70] __netif_receive_skb+0x3c4/0x53c
[effe7cf0] [c04af9ec] netif_receive_skb+0xac/0xc0
[effe7d20] [f1b21160] ieee80211_sta_ps_transition+0x100/0x2fd8 [mac80211]
[effe7d40] [f1b22098] ieee80211_sta_ps_transition+0x1038/0x2fd8 [mac80211]
[effe7dc0] [f1b238f0] ieee80211_sta_ps_transition+0x2890/0x2fd8 [mac80211]
[effe7e00] [f1b24748] ieee80211_rx+0x710/0x7b8 [mac80211]
[effe7e60] [f1b75860] ath_rx_tasklet+0xa88/0xfbc [ath9k]
[effe7f50] [f1b74ac8] ath9k_tasklet+0xfc/0x148 [ath9k]
[effe7f70] [c004bd04] tasklet_action+0xbc/0x194
[effe7fa0] [c004ccf4] __do_softirq+0xe8/0x170
[effe7ff0] [c0010270] call_do_softirq+0x14/0x24
[ef843e70] [c0004b08] do_softirq+0xb0/0xc4
[ef843e90] [c004ca88] irq_exit+0x94/0xb4
[ef843ea0] [c0004d8c] do_IRQ+0xfc/0x19c
[ef843ed0] [c0010f64] ret_from_except+0x0/0x18
--- Exception: 501 at cpu_idle+0x108/0x160
LR = cpu_idle+0x108/0x160
[ef843f90] [c0008a00] cpu_idle+0x60/0x160 (unreliable)
[ef843fb0] [c0637108] start_secondary+0x310/0x328
[ef843ff0] [c0001d00] __secondary_start+0x30/0x84
Rebooting in 180 seconds..
Thanks & Regards
Suman Pandit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20131029/f8ad0ebf/attachment-0001.htm
reply other threads:[~2013-10-29 9:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='339f6851$1fa30a91$10757195$@com' \
--to=suman.p@nuevonetwork.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.