From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-lf0-f46.google.com ([209.85.215.46]:34559 "EHLO mail-lf0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752912AbcFCVhk (ORCPT ); Fri, 3 Jun 2016 17:37:40 -0400 Received: by mail-lf0-f46.google.com with SMTP id k98so62468414lfi.1 for ; Fri, 03 Jun 2016 14:37:40 -0700 (PDT) From: Sergei Shtylyov To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 11/11] ARM: dts: blanche: add Ethernet support Date: Sat, 04 Jun 2016 00:37:37 +0300 Message-ID: <3446158.3RAgrIF8O1@wasted.cogentembedded.com> In-Reply-To: <3446154.oZ24315zaL@wasted.cogentembedded.com> References: <3446154.oZ24315zaL@wasted.cogentembedded.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov Acked-by: Simon Horman --- Changes in version 2: - added Simon's ACK. arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -29,6 +29,27 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; }; &extal_clk { From mboxrd@z Thu Jan 1 00:00:00 1970 From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov) Date: Sat, 04 Jun 2016 00:37:37 +0300 Subject: [PATCH v2 11/11] ARM: dts: blanche: add Ethernet support In-Reply-To: <3446154.oZ24315zaL@wasted.cogentembedded.com> References: <3446154.oZ24315zaL@wasted.cogentembedded.com> Message-ID: <3446158.3RAgrIF8O1@wasted.cogentembedded.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov Acked-by: Simon Horman --- Changes in version 2: - added Simon's ACK. arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -29,6 +29,27 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet at 18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; }; &extal_clk {