All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: tomi.valkeinen@ti.com, dri-devel@lists.freedesktop.org
Subject: Re: [RFC 3/7] drm/omap: Manage the usable omap_dss_device list within omap_drm_private
Date: Fri, 01 Sep 2017 14:27:08 +0300	[thread overview]
Message-ID: <3510335.Tu8AiCYPt6@avalon> (raw)
In-Reply-To: <20170829073218.11097-4-peter.ujfalusi@ti.com>

Hi Peter,

Thank you for the patch.

On Tuesday, 29 August 2017 10:32:14 EEST Peter Ujfalusi wrote:
> Instead of reaching back to DSS to iterate through the dss_devices every
> time, use an internal array where we store the available and usable
> dss_devices.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  drivers/gpu/drm/omapdrm/omap_drv.c | 95 +++++++++++++++++++++--------------
>  drivers/gpu/drm/omapdrm/omap_drv.h |  3 ++
>  2 files changed, 62 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index bd7fe317a365..b089604e871c
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -146,18 +146,27 @@ static int get_connector_type(struct omap_dss_device
> *dssdev) }
>  }
> 
> -static void omap_disconnect_dssdevs(void)
> +static void omap_disconnect_dssdevs(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {

is is never negative, you can make it an unsigned int. This comment applies 
through the whole patch.

> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev)
>  		dssdev->driver->disconnect(dssdev);
> +		priv->dssdevs[i] = NULL;
> +		omap_dss_put_device(dssdev);
> +	}
> +
> +	priv->num_dssdevs = 0;
>  }
> 
> -static int omap_connect_dssdevs(void)
> +static int omap_connect_dssdevs(struct drm_device *ddev)
>  {
> -	int r;
> +	struct omap_drm_private *priv = ddev->dev_private;
>  	struct omap_dss_device *dssdev = NULL;
> +	int r;
> 
>  	if (!omapdss_stack_is_ready())
>  		return -EPROBE_DEFER;
> @@ -170,6 +179,14 @@ static int omap_connect_dssdevs(void)
>  		} else if (r) {
>  			dev_warn(dssdev->dev, "could not connect display: %s\n",
>  				dssdev->name);
> +		} else {
> +			omap_dss_get_device(dssdev);
> +			priv->dssdevs[priv->num_dssdevs++] = dssdev;
> +			if (priv->num_dssdevs == ARRAY_SIZE(priv->dssdevs)) {
> +				/* To balance the 'for_each_dss_dev' loop */
> +				omap_dss_put_device(dssdev);
> +				break;
> +			}
>  		}
>  	}
> 
> @@ -180,7 +197,7 @@ static int omap_connect_dssdevs(void)
>  	 * if we are deferring probe, we disconnect the devices we previously
>  	 * connected
>  	 */
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
> 
>  	return r;
>  }
> @@ -205,7 +222,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	int num_ovls = priv->dispc_ops->get_num_ovls();
>  	int num_mgrs = priv->dispc_ops->get_num_mgrs();
>  	int num_crtcs, crtc_idx, plane_idx;
> -	int ret;
> +	int ret, i;
>  	u32 plane_crtc_mask;
> 
>  	drm_mode_config_init(dev);
> @@ -222,11 +239,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	 * configuration does not match the expectations or exceeds
>  	 * the available resources, the configuration is rejected.
>  	 */
> -	num_crtcs = 0;
> -	for_each_dss_dev(dssdev)
> -		if (omapdss_device_is_connected(dssdev))
> -			num_crtcs++;
> -
> +	num_crtcs = priv->num_dssdevs;
>  	if (num_crtcs > num_mgrs || num_crtcs > num_ovls ||
>  	    num_crtcs > ARRAY_SIZE(priv->crtcs) ||
>  	    num_crtcs > ARRAY_SIZE(priv->planes) ||
> @@ -244,15 +257,13 @@ static int omap_modeset_init(struct drm_device *dev)
> 
>  	crtc_idx = 0;
>  	plane_idx = 0;
> -	for_each_dss_dev(dssdev) {
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
>  		struct drm_connector *connector;
>  		struct drm_encoder *encoder;
>  		struct drm_plane *plane;
>  		struct drm_crtc *crtc;
> 
> -		if (!omapdss_device_is_connected(dssdev))
> -			continue;
> -

I believe this hunk is correct as dss devices are only disconnected by calls 
to the oma_dss_driver .disconnect() operation, which is only called from 
omap_disconnect_dssdevs(), but you should at the very least explain why in the 
commit message.

>  		encoder = omap_encoder_init(dev, dssdev);
>  		if (!encoder)
>  			return -ENOMEM;
> @@ -326,11 +337,14 @@ static int omap_modeset_init(struct drm_device *dev)
>  /*
>   * Enable the HPD in external components if supported
>   */
> -static void omap_modeset_enable_external_hpd(void)
> +static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (dssdev->driver->enable_hpd)
>  			dssdev->driver->enable_hpd(dssdev);
>  	}
> @@ -339,11 +353,14 @@ static void omap_modeset_enable_external_hpd(void)
>  /*
>   * Disable the HPD in external components if supported
>   */
> -static void omap_modeset_disable_external_hpd(void)
> +static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (dssdev->driver->disable_hpd)
>  			dssdev->driver->disable_hpd(dssdev);
>  	}
> @@ -562,7 +579,7 @@ static int pdev_probe(struct platform_device *pdev)
> 
>  	omap_crtc_pre_init();
> 
> -	ret = omap_connect_dssdevs();
> +	ret = omap_connect_dssdevs(ddev);
>  	if (ret)
>  		goto err_crtc_uninit;
> 
> @@ -597,7 +614,7 @@ static int pdev_probe(struct platform_device *pdev)
>  	priv->fbdev = omap_fbdev_init(ddev);
> 
>  	drm_kms_helper_poll_init(ddev);
> -	omap_modeset_enable_external_hpd();
> +	omap_modeset_enable_external_hpd(ddev);
> 
>  	/*
>  	 * Register the DRM device with the core and the connectors with
> @@ -610,7 +627,7 @@ static int pdev_probe(struct platform_device *pdev)
>  	return 0;
> 
>  err_cleanup_helpers:
> -	omap_modeset_disable_external_hpd();
> +	omap_modeset_disable_external_hpd(ddev);
>  	drm_kms_helper_poll_fini(ddev);
>  	if (priv->fbdev)
>  		omap_fbdev_free(ddev);
> @@ -620,7 +637,7 @@ static int pdev_probe(struct platform_device *pdev)
>  err_gem_deinit:
>  	omap_gem_deinit(ddev);
>  	destroy_workqueue(priv->wq);
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
>  err_crtc_uninit:
>  	omap_crtc_pre_uninit();
>  	drm_dev_unref(ddev);
> @@ -636,7 +653,7 @@ static int pdev_remove(struct platform_device *pdev)
> 
>  	drm_dev_unregister(ddev);
> 
> -	omap_modeset_disable_external_hpd();
> +	omap_modeset_disable_external_hpd(ddev);
>  	drm_kms_helper_poll_fini(ddev);
> 
>  	if (priv->fbdev)
> @@ -651,7 +668,7 @@ static int pdev_remove(struct platform_device *pdev)
> 
>  	destroy_workqueue(priv->wq);
> 
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
>  	omap_crtc_pre_uninit();
> 
>  	drm_dev_unref(ddev);
> @@ -660,11 +677,14 @@ static int pdev_remove(struct platform_device *pdev)
>  }
> 
>  #ifdef CONFIG_PM_SLEEP
> -static int omap_drm_suspend_all_displays(void)
> +static int omap_drm_suspend_all_displays(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (!dssdev->driver)
>  			continue;
> 
> @@ -679,11 +699,14 @@ static int omap_drm_suspend_all_displays(void)
>  	return 0;
>  }
> 
> -static int omap_drm_resume_all_displays(void)
> +static int omap_drm_resume_all_displays(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (!dssdev->driver)
>  			continue;
> 
> @@ -703,7 +726,7 @@ static int omap_drm_suspend(struct device *dev)
>  	drm_kms_helper_poll_disable(drm_dev);
> 
>  	drm_modeset_lock_all(drm_dev);
> -	omap_drm_suspend_all_displays();
> +	omap_drm_suspend_all_displays(drm_dev);
>  	drm_modeset_unlock_all(drm_dev);
> 
>  	return 0;
> @@ -714,7 +737,7 @@ static int omap_drm_resume(struct device *dev)
>  	struct drm_device *drm_dev = dev_get_drvdata(dev);
> 
>  	drm_modeset_lock_all(drm_dev);
> -	omap_drm_resume_all_displays();
> +	omap_drm_resume_all_displays(drm_dev);
>  	drm_modeset_unlock_all(drm_dev);
> 
>  	drm_kms_helper_poll_enable(drm_dev);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h
> b/drivers/gpu/drm/omapdrm/omap_drv.h index 4bd1e9070b31..cccaae787a7c
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -51,6 +51,9 @@ struct omap_drm_private {
> 
>  	const struct dispc_ops *dispc_ops;
> 
> +	unsigned int num_dssdevs;
> +	struct omap_dss_device *dssdevs[8];
> +
>  	unsigned int num_crtcs;
>  	struct drm_crtc *crtcs[8];


-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-09-01 13:13 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-29  7:32 [RFC 0/7] drm/omap: Module parameter for display order configuration Peter Ujfalusi
2017-08-29  7:32 ` [RFC 1/7] drm/omap: Use devm_kzalloc() to allocate omap_drm_private Peter Ujfalusi
2017-09-01 11:10   ` Laurent Pinchart
2017-09-04  9:13     ` Peter Ujfalusi
2017-09-04  9:41       ` Laurent Pinchart
2017-09-04 11:16         ` Peter Ujfalusi
2017-09-04 14:19           ` Laurent Pinchart
2017-09-05  6:35             ` Peter Ujfalusi
2017-08-29  7:32 ` [RFC 2/7] drm/omap: Allocate drm_device earlier and unref it as last step Peter Ujfalusi
2017-09-01 11:12   ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 3/7] drm/omap: Manage the usable omap_dss_device list within omap_drm_private Peter Ujfalusi
2017-09-01 11:27   ` Laurent Pinchart [this message]
2017-09-04  9:19     ` Peter Ujfalusi
2017-09-04  9:45       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 4/7] drm/omap: Separate the dssdevs array setup from the connect function Peter Ujfalusi
2017-08-29  7:32 ` [RFC 5/7] drm/omap: Do dss_device (display) ordering in omap_drv.c Peter Ujfalusi
2017-09-01 11:32   ` Laurent Pinchart
2017-09-04  9:26     ` Peter Ujfalusi
2017-09-04  9:46       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 6/7] drm/omap: dss: Remove display ordering from dss/display.c Peter Ujfalusi
2017-08-29  7:32 ` [RFC 7/7] drm/omap: Add kernel parameter to specify the desired display order Peter Ujfalusi
2017-09-01 11:36 ` [RFC 0/7] drm/omap: Module parameter for display order configuration Laurent Pinchart
2017-09-04 10:03   ` Peter Ujfalusi
2018-05-25 20:09     ` Laurent Pinchart
2017-10-05  9:56 ` Pekka Paalanen
2017-10-05 10:01   ` Tomi Valkeinen
2017-10-05 10:43     ` Pekka Paalanen
2017-10-05 11:24       ` Tomi Valkeinen
2017-10-05 11:54         ` Pekka Paalanen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3510335.Tu8AiCYPt6@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.