From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3551.81.252.86.91.1206464698.squirrel@domain.hid> In-Reply-To: <18408.10253.285795.914555@domain.hid> References: <16201.81.252.86.91.1205764989.squirrel@domain.hid> <18400.53752.538963.384358@domain.hid> <6621.81.252.86.91.1205927700.squirrel@domain.hid> <2ff1a98a0803190613r7572d87eibef16aecf39ef71a@domain.hid> <10023.62.39.72.60.1205940829.squirrel@domain.hid> <18407.43111.568301.509775@domain.hid> <18407.58512.849738.173184@domain.hid> <18408.10253.285795.914555@domain.hid> Date: Tue, 25 Mar 2008 18:04:58 +0100 (CET) From: "Fabien MAHOT" MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai-help] Application crash List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org Hello, thank you very much for your answers ! I tried several configurations with my AMD ETX module... Interrupt shield enable/disable, with GeodeLX or Pentium-MMX processor. My application always crashed. However when the priority coupling was disabled, my application worked correctly. (but it must be enabled) You said to me that I ve got an hardware issue. So, I tried with an other ETX module. A Kontron with celeron processor. With or Without the interrupt shield, my application crashed. I also try with a PC with a celeron processor, that's the same result. Maybe, I ve got a problem with my c libraries, but as I ve got a good beahaviour when the priority coupling is disabled.What is your libraries version, please ? So, I am almost sure that it's not a hardware problem. But a problem with my xenomai environment