Aw: Re: [Xenomai-help] NMI watchdog: Loading of xeno_native leads to

["M. Koehrer" <mathias_koehrer@domain.hid>]

Hi!

I have modified the configuration to disable profiling and to set the NMI time value to 100.
However, there is no difference.
Could this be a compiler issue?
I am using gcc 4.1.2 (debian etch prerelease)
I try to recompile the kernel using an older gcc-3.3 to see if this helps.

Regards

Mathias
> > here is my /proc/interrupts 
> > 
> >            CPU0
> >   0:     331260   IO-APIC-edge      timer
> >   1:          8   IO-APIC-edge      i8042
> >   7:          0   IO-APIC-edge      parport0
> >   9:          0   IO-APIC-fasteoi   acpi
> >  14:         12   IO-APIC-edge      ide0
> >  16:       1022   IO-APIC-fasteoi   eth0
> >  19:       2358   IO-APIC-fasteoi   libata
> > NMI:     331248
> > LOC:     331233
> > ERR:          0
> > MIS:          0
> 
> Nothing unusual on first sight.
> 
> > 
> > I have enclosed a config.gz file of my 2.6.19.1 kernel.
> 
> Two things to try:
>  - CONFIG_XENO_HW_NMI_DEBUG_LATENCY_MAX=100 (i.e. default again)
>  - CONFIG_PROFILING=y (I'm not sure ATM if it may interfere with
>                        Xenomai's watchdog)
> 
> Jan
> 
> 

-- 
Mathias Koehrer
mathias_koehrer@domain.hid


Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren
ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT JETZT bei Arcor: günstig
und schnell mit DSL - das All-Inclusive-Paket für clevere Doppel-Sparer,
nur  44,85 €  inkl. DSL- und ISDN-Grundgebühr!
http://www.arcor.de/rd/emf-dsl-2