All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baolu Lu <baolu.lu@linux.intel.com>
To: ZhaoJinming <zhaojinming@uniontech.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
	iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] iommu/vt-d: Fix copied_tables bitmap leak on error in copy_translation_tables
Date: Mon, 27 Jul 2026 09:51:48 +0800	[thread overview]
Message-ID: <367f963a-d337-4d49-9d5b-a558fcba813a@linux.intel.com> (raw)
In-Reply-To: <20260721132635.1436908-1-zhaojinming@uniontech.com>

On 7/21/26 21:26, ZhaoJinming wrote:
> The iommu->copied_tables bitmap was introduced by the IOMMU live
> update series to track which context entries have been copied from
> the previous kernel.  The allocation via bitmap_zalloc() was added
> inside copy_translation_tables(), but the error paths were not
> updated to free it:
> 
>    1. When old_rt_phys is 0 (invalid root table address)
>    2. When memremap(old_rt_phys) fails
>    3. When kcalloc for ctxt_tbls fails (goto out_unmap, which only
>       unmaps old_rt without releasing the bitmap)
> 
> The bitmap is only cleaned up by free_dmar_iommu(), which is
> called from the free_iommu error label in init_dmars().  However,
> when copy_translation_tables() fails, init_dmars() does not jump
> to free_iommu -- it logs the error, falls through, and continues
> with the next IOMMU.  As a result, copied_tables is leaked.
> 
> Fix this by converting the two early returns to goto a new
> err_free_bitmap label, and by making out_unmap fall through to
> it so that the bitmap is always freed on any error path.  The
> success path is changed to return 0 directly instead of falling
> through to out_unmap, since copied_tables must remain allocated
> for subsequent use.
> 
> Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
> ---
>   drivers/iommu/intel/iommu.c | 18 ++++++++++++------
>   1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 849d06dfe1ae..25f49d29da8a 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -1554,12 +1554,16 @@ static int copy_translation_tables(struct intel_iommu *iommu)
>   		return -ENOMEM;
>   
>   	old_rt_phys = rtaddr_reg & VTD_PAGE_MASK;
> -	if (!old_rt_phys)
> -		return -EINVAL;
> +	if (!old_rt_phys) {
> +		ret = -EINVAL;
> +		goto err_free_bitmap;
> +	}
>   
>   	old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
> -	if (!old_rt)
> -		return -ENOMEM;
> +	if (!old_rt) {
> +		ret = -ENOMEM;
> +		goto err_free_bitmap;
> +	}
>   
>   	/* This is too big for the stack - allocate it from slab */
>   	ctxt_table_entries = ext ? 512 : 256;
> @@ -1603,11 +1607,13 @@ static int copy_translation_tables(struct intel_iommu *iommu)
>   
>   	__iommu_flush_cache(iommu, iommu->root_entry, PAGE_SIZE);
>   
> -	ret = 0;
> +	return 0;

Returning directly here bypasses memunmap().

Sashiko reported this as well:

"
Does this code leak the old_rt memory mapping on the success path?
old_rt is mapped earlier in this function:
copy_translation_tables() {
     ...
     old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
     ...
}

By returning directly here instead of setting ret = 0 and falling
through, it looks like we bypass the memunmap(old_rt) call under the
out_unmap label, leaving the mapping active.
"

https://sashiko.dev/#/patchset/20260721132635.1436908-1-zhaojinming%40uniontech.com

Do you mind fixing this with a v2?

>   
>   out_unmap:
>   	memunmap(old_rt);
> -
> +err_free_bitmap:
> +	bitmap_free(iommu->copied_tables);
> +	iommu->copied_tables = NULL;
>   	return ret;
>   }
>   

Thanks,
baolu

  reply	other threads:[~2026-07-27  1:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-21 13:26 [PATCH] iommu/vt-d: Fix copied_tables bitmap leak on error in copy_translation_tables ZhaoJinming
2026-07-27  1:51 ` Baolu Lu [this message]
2026-07-27  5:22   ` [PATCH v2] " ZhaoJinming

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=367f963a-d337-4d49-9d5b-a558fcba813a@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=zhaojinming@uniontech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.