All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Ben Tseng <ben.tseng@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org, srv_heupstream@mediatek.com
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	 Mark Rutland <mark.rutland@arm.com>,
	hsinyi@chromium.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Michael Kao <michael.kao@mediatek.com>,
	Michael Kao <michael.kao@mediatek.comi>
Subject: Re: [PATCH v5 1/3] thermal: mediatek: Relocate driver to mediatek folder
Date: Fri, 18 Jun 2021 15:56:45 +0200	[thread overview]
Message-ID: <372c579c-5cdc-e66a-af99-ea8ee8533ded@gmail.com> (raw)
In-Reply-To: <20210617114707.10618-2-ben.tseng@mediatek.com>



On 17/06/2021 13:47, Ben Tseng wrote:
> From: Michael Kao <michael.kao@mediatek.com>
> 
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.comi>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/thermal/Kconfig                       | 14 ++++-------
>  drivers/thermal/Makefile                      |  2 +-
>  drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>  drivers/thermal/mediatek/Makefile             |  1 +
>  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>  5 files changed, 29 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/thermal/mediatek/Kconfig
>  create mode 100644 drivers/thermal/mediatek/Makefile
>  rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index d7f44deab5b1..7a4ba50ba97d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -401,16 +401,10 @@ config DA9062_THERMAL
>  	  zone.
>  	  Compatible with the DA9062 and DA9061 PMICs.
>  
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>  
>  config AMLOGIC_THERMAL
>  	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 82fc3e616e54..9729a2b08991 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -54,7 +54,7 @@ obj-y				+= st/
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
>  obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>  obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>  obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..0351e73170b7
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "Mediatek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +	  This is the option for Mediatek thermal software
> +	  solutions. Please enable corresponding options to
> +	  get temperature information from thermal sensors or
> +	  turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for mediatek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +	  Enable this option if you want to get SoC temperature
> +	  information for Mediatek platforms. This driver
> +	  configures thermal controllers to collect temperature
> +	  via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Ben Tseng <ben.tseng@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org, srv_heupstream@mediatek.com
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	hsinyi@chromium.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Michael Kao <michael.kao@mediatek.com>,
	Michael Kao <michael.kao@mediatek.comi>
Subject: Re: [PATCH v5 1/3] thermal: mediatek: Relocate driver to mediatek folder
Date: Fri, 18 Jun 2021 15:56:45 +0200	[thread overview]
Message-ID: <372c579c-5cdc-e66a-af99-ea8ee8533ded@gmail.com> (raw)
In-Reply-To: <20210617114707.10618-2-ben.tseng@mediatek.com>



On 17/06/2021 13:47, Ben Tseng wrote:
> From: Michael Kao <michael.kao@mediatek.com>
> 
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.comi>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/thermal/Kconfig                       | 14 ++++-------
>  drivers/thermal/Makefile                      |  2 +-
>  drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>  drivers/thermal/mediatek/Makefile             |  1 +
>  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>  5 files changed, 29 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/thermal/mediatek/Kconfig
>  create mode 100644 drivers/thermal/mediatek/Makefile
>  rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index d7f44deab5b1..7a4ba50ba97d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -401,16 +401,10 @@ config DA9062_THERMAL
>  	  zone.
>  	  Compatible with the DA9062 and DA9061 PMICs.
>  
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>  
>  config AMLOGIC_THERMAL
>  	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 82fc3e616e54..9729a2b08991 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -54,7 +54,7 @@ obj-y				+= st/
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
>  obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>  obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>  obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..0351e73170b7
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "Mediatek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +	  This is the option for Mediatek thermal software
> +	  solutions. Please enable corresponding options to
> +	  get temperature information from thermal sensors or
> +	  turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for mediatek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +	  Enable this option if you want to get SoC temperature
> +	  information for Mediatek platforms. This driver
> +	  configures thermal controllers to collect temperature
> +	  via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c
> 

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Ben Tseng <ben.tseng@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org, srv_heupstream@mediatek.com
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	 Mark Rutland <mark.rutland@arm.com>,
	hsinyi@chromium.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Michael Kao <michael.kao@mediatek.com>,
	Michael Kao <michael.kao@mediatek.comi>
Subject: Re: [PATCH v5 1/3] thermal: mediatek: Relocate driver to mediatek folder
Date: Fri, 18 Jun 2021 15:56:45 +0200	[thread overview]
Message-ID: <372c579c-5cdc-e66a-af99-ea8ee8533ded@gmail.com> (raw)
In-Reply-To: <20210617114707.10618-2-ben.tseng@mediatek.com>



On 17/06/2021 13:47, Ben Tseng wrote:
> From: Michael Kao <michael.kao@mediatek.com>
> 
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.comi>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/thermal/Kconfig                       | 14 ++++-------
>  drivers/thermal/Makefile                      |  2 +-
>  drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>  drivers/thermal/mediatek/Makefile             |  1 +
>  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>  5 files changed, 29 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/thermal/mediatek/Kconfig
>  create mode 100644 drivers/thermal/mediatek/Makefile
>  rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index d7f44deab5b1..7a4ba50ba97d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -401,16 +401,10 @@ config DA9062_THERMAL
>  	  zone.
>  	  Compatible with the DA9062 and DA9061 PMICs.
>  
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>  
>  config AMLOGIC_THERMAL
>  	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 82fc3e616e54..9729a2b08991 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -54,7 +54,7 @@ obj-y				+= st/
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
>  obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>  obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>  obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..0351e73170b7
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "Mediatek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +	  This is the option for Mediatek thermal software
> +	  solutions. Please enable corresponding options to
> +	  get temperature information from thermal sensors or
> +	  turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for mediatek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +	  Enable this option if you want to get SoC temperature
> +	  information for Mediatek platforms. This driver
> +	  configures thermal controllers to collect temperature
> +	  via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..f75313ddce5e
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-06-18 13:57 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17 11:47 [PATCH v5 0/3] thermal: mediatek: Add LVTS architecture thermal controller Ben Tseng
2021-06-17 11:47 ` Ben Tseng
2021-06-17 11:47 ` Ben Tseng
2021-06-17 11:47 ` [PATCH v5 1/3] thermal: mediatek: Relocate driver to mediatek folder Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-18 13:56   ` Matthias Brugger [this message]
2021-06-18 13:56     ` Matthias Brugger
2021-06-18 13:56     ` Matthias Brugger
2021-06-17 11:47 ` [PATCH v5 2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-21 11:26   ` Daniel Lezcano
2021-06-21 11:26     ` Daniel Lezcano
2021-06-21 11:26     ` Daniel Lezcano
2021-07-23  6:17     ` Ben Tseng
2021-07-23  6:17       ` Ben Tseng
2021-07-23  6:17       ` Ben Tseng
2021-08-16 18:56       ` Daniel Lezcano
2021-08-16 18:56         ` Daniel Lezcano
2021-08-16 18:56         ` Daniel Lezcano
2022-04-05 10:53   ` AngeloGioacchino Del Regno
2022-04-05 10:53     ` AngeloGioacchino Del Regno
2022-04-05 10:53     ` AngeloGioacchino Del Regno
2021-06-17 11:47 ` [PATCH v5 3/3] dt-bindings: thermal: Add binding document for mt6873 thermal controller Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-17 11:47   ` Ben Tseng
2021-06-18 19:10   ` Rob Herring
2021-06-18 19:10     ` Rob Herring
2021-06-18 19:10     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=372c579c-5cdc-e66a-af99-ea8ee8533ded@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=ben.tseng@mediatek.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=fan.chen@mediatek.com \
    --cc=hsinyi@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michael.kao@mediatek.com \
    --cc=michael.kao@mediatek.comi \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.