Re: [lm-sensors] insane readings on Asus A7M266 motherboard

[Audio Phile <da_audiophile@yahoo.com>]

Thank you!  This absolutely solved my problem!  I do remember now having to do this addition to grub2's /boot/grub/grub.conf to make it work in the past.

# sensors
as99127f-i2c-0-2d
Adapter: SMBus Via Pro adapter at e800
in0:         +1.74 V  (min =  +1.65 V, max =  +2.05 V)   
in1:         +2.48 V  (min =  +1.65 V, max =  +2.05 V)   
in2:         +3.22 V  (min =  +2.96 V, max =  +3.63 V)   
in3:         +2.99 V  (min =  +2.67 V, max =  +3.28 V)   
in4:         +3.14 V  (min =  +2.51 V, max =  +3.79 V)   
in5:         +0.51 V  (min =  +0.08 V, max =  +1.02 V)   
in6:         +0.86 V  (min =  +0.54 V, max =  +1.17 V)   
fan1:       2721 RPM  (min = 5273 RPM, div = 2)
fan2:          0 RPM  (min = 337500 RPM, div = 2)
fan3:          0 RPM  (min =   -1 RPM, div = 2)
temp1:       +34.0°C  (high =  +0.0°C, hyst = -128.0°C)  
temp2:       +52.0°C  (high = +100.0°C, hyst = +75.0°C)  
temp3:        -0.5°C  (high = +80.0°C, hyst = +75.0°C)  
cpu0_vid:   +1.750 V
beep_enable:enabled


--- On Mon, 1/24/11, Jean Delvare <khali@linux-fr.org> wrote:

> The VIA Pro SMBus isn't probed, meaning that the driver
> failed to bind
> to the device. You should see some error message in the
> kernel logs
> when i2c-viapro is loaded.
> 
> One possible cause is an ACPI resource conflict [1]. I am a
> little
> surprised as I didn't expect this kind of problem on such
> an old board.
> If this is the case, booting with
> acpi_enforce_resources=lax should
> solve your problem.
> 
> [1] http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
> 
> -- 
> Jean Delvare
> http://khali.linux-fr.org/wishlist.html
> 


      

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors