From: "Gerhard Pircher" <gerhard_pircher@gmx.net>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, debian-powerpc@lists.debian.org
Subject: Re: AGPGART driver for ArticiaS - ioremap() problem
Date: Mon, 23 Jan 2006 23:15:39 +0100 (MET) [thread overview]
Message-ID: <3784.1138054539@www080.gmx.net> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 209 bytes --]
Forgot to include the lspci log. So here it comes. Sorry!
Gerhard
--
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen für GMX Partner: http://www.gmx.net/de/go/partner
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: lspci.log --]
[-- Type: text/x-log; name="lspci.log", Size: 10385 bytes --]
0000:00:00.0 Host bridge: Mai Logic Incorporated Articia S Host Bridge (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] AGP version 1.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
0000:00:01.0 PCI bridge: Mai Logic Incorporated Articia S PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
!!! Unknown I/O range types 21/20
Memory behind bridge: 88000000-880fffff
Prefetchable memory behind bridge: 80000000-87ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at fe802000 [size=128]
Region 1: Memory at 98100000 (32-bit, non-prefetchable) [size=128]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Region 4: I/O ports at fe00cc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 31, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at fe802080 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 31, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at fe8020a0 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at fe802100 [size=256]
Region 1: I/O ports at fe802200 [size=4]
Region 2: I/O ports at fe802204 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 30)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at fe802300 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs: Unknown device 8067
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fe802400 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 0: I/O ports at fe802420 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at fe002000 [size=256]
Region 2: Memory at 88000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 88020000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7c12
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Region 0: Memory at 88000000 (32-bit, prefetchable)
Region 1: Memory at 88010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
80000000-efffffff : PCI host bridge
80000000-87ffffff : PCI Bus #01
80000000-87ffffff : 0000:01:00.0
80000000-87ffffff : radeonfb framebuffer
88000000-880fffff : PCI Bus #01
88000000-8800ffff : 0000:01:00.0
88000000-8800ffff : radeonfb mmio
88010000-8801ffff : 0000:01:00.1
88020000-8803ffff : 0000:01:00.0
98100000-9810007f : 0000:00:06.0
00000000-00bfffff : PCI host bridge
00000000-0000001f : dma1
00000020-00000021 : 8259 (master)
00000040-0000005f : timer
00000060-0000006f : i8042
00000080-0000008f : dma page reg
000000a0-000000a1 : 8259 (slave)
000000c0-000000df : dma2
00000170-00000177 : ide1
000001f0-000001f7 : ide0
00000278-0000027a : parport2
0000027b-0000027f : parport2
000002f8-000002ff : serial
00000376-00000376 : ide1
00000378-0000037a : parport0
000003bc-000003be : parport1
000003c0-000003df : vga+
000003e8-000003ef : serial
000003f6-000003f6 : ide0
000003f8-000003ff : serial
000004d0-000004d1 : 8259 edge control
00002000-00002fff : PCI Bus #01
00002000-000020ff : 0000:01:00.0
0000cc00-0000cc0f : 0000:00:07.1
0000cc00-0000cc07 : ide0
0000cc08-0000cc0f : ide1
00802000-0080207f : 0000:00:06.0
00802000-0080207f : 0000:00:06.0
00802080-0080209f : 0000:00:07.2
00802080-0080209f : uhci_hcd
008020a0-008020bf : 0000:00:07.3
008020a0-008020bf : uhci_hcd
00802100-008021ff : 0000:00:07.5
00802200-00802203 : 0000:00:07.5
00802204-00802207 : 0000:00:07.5
00802300-008023ff : 0000:00:07.6
00802400-0080241f : 0000:00:09.0
00802400-0080241f : EMU10K1
00802420-00802427 : 0000:00:09.1
00802420-00802427 : emu10k1-gp
next reply other threads:[~2006-01-23 22:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-23 22:15 Gerhard Pircher [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-21 1:59 AGPGART driver for ArticiaS - ioremap() problem Gerhard Pircher
2006-01-21 22:48 ` Benjamin Herrenschmidt
2006-01-23 22:12 ` Gerhard Pircher
2006-01-23 23:15 ` Benjamin Herrenschmidt
2006-01-15 23:10 Gerhard Pircher
2006-01-15 23:25 ` Benjamin Herrenschmidt
2006-01-16 8:11 ` Gerhard Pircher
2006-01-16 23:18 ` Benjamin Herrenschmidt
2006-01-17 8:37 ` Gerhard Pircher
2006-01-17 21:24 ` Benjamin Herrenschmidt
2006-01-18 19:40 ` Gerhard Pircher
2006-01-18 23:09 ` Benjamin Herrenschmidt
2006-01-19 8:50 ` Gerhard Pircher
2006-01-19 9:59 ` Benjamin Herrenschmidt
2006-01-19 10:52 ` Gerhard Pircher
2006-01-19 22:09 ` Benjamin Herrenschmidt
2006-01-20 11:16 ` Gerhard Pircher
2006-01-20 23:00 ` Benjamin Herrenschmidt
2006-01-11 21:00 Gerhard Pircher
2006-01-11 21:52 ` John W. Linville
2006-01-11 22:18 ` Gerhard Pircher
2006-01-12 4:44 ` Benjamin Herrenschmidt
2006-01-12 8:15 ` Gerhard Pircher
2006-01-15 21:48 ` Benjamin Herrenschmidt
2006-01-12 19:15 ` Gerhard Pircher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3784.1138054539@www080.gmx.net \
--to=gerhard_pircher@gmx.net \
--cc=benh@kernel.crashing.org \
--cc=debian-powerpc@lists.debian.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.