From: Grant Carter <gcarter@eng.uct.ac.za>
To: linuxppc-embedded@lists.linuxppc.org
Subject: Help with BSE-IP Board and Linux 2.2.5
Date: Tue, 12 Oct 1999 17:48:14 +0200 [thread overview]
Message-ID: <3803583E.526DCD2E@eng.uct.ac.za> (raw)
Hi all
Perhaps someone can help me. I have just received my BSE IP-Engine and
have compiled the 2.2.5 kernel for it. The compilation went successfully
and, after setting up the IP address etc on the board and getting my
TFTP server running, I downloaded the kernel to the board (via Ethernet
so I know it is working). Since the user space starts at 0x4000, I
loaded the zImage there. When I tried to run it, the BSE board froze. I
found that I had downloaded an old kernel from linuxppc.cs.nmt.edu for
the BSE board and when I tried it, I got the same results. Does it
matter to the kernel at what address in memory it is loaded and if so,
where can I change this is the linker?
I have set up my NFS server with the mbxroot.min files in it. I am not
100% sure that this is working but am I correct in assuming that I
should see the beginning of the kernel booting before it requires any
files from the NFS server?
Any ideas on how to proceed from here? Does somebody have a known
working kernel for this board which I can try?
TIA
Grant
--
Grant Carter gcarter@eng.uct.ac.za
Department of Electrical Engineering University of Cape Town
Tel: +27 (0)21 650-3467 Fax: +27 (0)21 650-3465
"Coffee not found - operator halted!"
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~1999-10-12 15:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-10-12 15:48 Grant Carter [this message]
1999-10-12 17:01 ` Help with BSE-IP Board and Linux 2.2.5 Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3803583E.526DCD2E@eng.uct.ac.za \
--to=gcarter@eng.uct.ac.za \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.