From: Wang Yong <wung_y@263.net>
To: TiVo Webmaster <webmaster@tivo.com>
Cc: linuxppc embedded mail list <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: TiVo Kernel for 403GCX Update (was Re: Support for IBM CPUs?)
Date: Fri, 12 Nov 1999 11:12:05 +0800 [thread overview]
Message-ID: <382B8585.D3922B01@263.net> (raw)
In-Reply-To: NCBBKEJANBMELEFCJOGIGEKJDFAA.webmaster@tivo.com
i downloaded the toolchain from tivo/linux but failed to build it on my
i386 box. i have installed cross gcc for ppc-2.95.2 under
/usr/local/gcc-ppc.
below is what i did to build:
1. uncompress toolchain.tar.gz to my work directory
2. run libc-ppc/doConfig
3. create libc-ppc/configparms contains these lines:
CC=/usr/local/gcc-ppc/bin/gcc
AR=/usr/local/gcc-ppc/bin/ar
RANLIB=/usr/local/gcc-ppc/bin/ranlib
AS=/usr/local/gcc-ppc/bin/as
LD=/usr/local/gcc-ppc/bin/ld
BUILD_CC=/usr/bin/gcc
4. run "make all" under directory "libc-ppc"
after a while, i was told something wrong:
mv -f /root/toolchain/libc-ppc/csu/crtn.s-new
/root/toolchain/libc-ppc/csu/crtn.s
/usr/local/gcc-ppc/bin/gcc -c /root/toolchain/libc-ppc/csu/crti.s -o
/root/toolchain/libc-ppc/csu/crti.o
/usr/local/gcc-ppc/bin/gcc -c /root/toolchain/libc-ppc/csu/crtn.s -o
/root/toolchain/libc-ppc/csu/crtn.o
/usr/local/gcc-ppc/bin/gcc ../sysdeps/powerpc/elf/crtbegin.S -c -I. -I..
-I../libio -I/root/toolchain/libc-ppc -I../sysdeps/powerpo
/usr/local/gcc-ppc/bin/gcc ../sysdeps/powerpc/elf/crtend.S -c -I. -I..
-I../libio -I/root/toolchain/libc-ppc -I../sysdeps/powerpc/o
make[2]: *** No rule to make target
`/root/toolchain/libc-ppc/csu/crtbeginS.o', needed by `others'. Stop.
make[2]: Leaving directory `/root/toolchain/libc/csu'
make[1]: *** [csu/others] Error 2
make[1]: Leaving directory `/root/toolchain/libc'
make: *** [all] Error 2
i check the csu/Makefile and found the error may be caused by makefile.
so
i build crtbegin.so by myself and copy to the right place and after
that i can go on. but another error appeared when build library of nss
and
nis. it seems it's also makefile's problem.
is there something wrong in these steps? i think the makefile should
be correct and i must do something wrong. has anyone already build
libc-ppc
successfully?
TiVo Webmaster wrote:
>
> Got it done yesterday!
>
> http://www.tivo.com/linux
>
> enjoy,
> Richard Bullwinkle
> TiVo Webmaster
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~1999-11-12 3:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-10-13 11:44 Support for IBM CPU's ? daniel.n.nilsson
1999-10-13 14:59 ` Grant Erickson
1999-10-13 21:13 ` Wolfgang Denk
1999-10-13 21:54 ` Grant Erickson
1999-10-14 5:13 ` Grant Erickson
1999-10-14 14:40 ` Adrian Cox
1999-10-18 21:38 ` Daniel Nilsson
1999-10-18 23:24 ` Jason Haas
1999-10-20 20:03 ` Support for IBM CPUs? Grant Erickson
1999-10-23 1:32 ` TiVo Kernel for 403GCX Update (was Re: Support for IBM CPUs?) Grant Erickson
1999-10-23 7:55 ` Wolfgang Denk
1999-10-23 16:37 ` TiVo Webmaster
1999-11-12 3:12 ` Wang Yong [this message]
1999-11-18 1:33 ` TiVo Webmaster
1999-10-24 10:57 ` Wang Yong
1999-10-25 14:33 ` Marcus Sundberg
1999-10-18 23:38 ` Support for IBM CPU's ? Grant Erickson
[not found] <B43E0634.1BD%mfryar@gcctech.com>
1999-10-28 18:04 ` TiVo Kernel for 403GCX Update (was Re: Support for IBM CPUs?) Grant Erickson
[not found] <Pine.SGI.4.10.9910281200550.695157-100000@sapphire.lcse.umn.edu>
1999-10-28 18:13 ` Jason Haas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=382B8585.D3922B01@263.net \
--to=wung_y@263.net \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=webmaster@tivo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.