From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id UAA21630 for ; Thu, 2 Dec 1999 20:58:51 -0700 Sender: cjohnson@cj-solutions.com Message-ID: <3846E9BD.DFC8D51C@mcn.net> Date: Thu, 02 Dec 1999 20:50:53 -0100 From: Carl Johnson MIME-Version: 1.0 To: Helge Deller , "parisc-linux@thepuffingroup.com" Subject: Re: [parisc-linux] Booting on J200 References: <38458959.9307D971@mcn.net> <99120220503901.00296@P100> Content-Type: text/plain; charset=iso-8859-1 List-ID: Thanks Helge: I never said I looked at the obvious first! Poor planning/thinking on my part. I did however about 2 secs before reading your post did recompile a FRESH ("VIRGIN") source and did manipulate the command line and get it to give me a Pengiun powered PA with a shell! Thanks Anyhow! Helge Deller wrote: > > Am Wed, 01 Dec 1999 schrieb Carl Johnson: > > I have built my own kernels and modified them some, but have also > > used the prebuilt kernels, I have had no success figuring out > > what hangs the kernel but anyhow, I will tell of my testing > > of the 1999-10-19 and 1999-11-13. And Hopefully I will > > recieve some help, _TIA_ > > > > -- > > 1999-10-19: Hangs at transfering control to kernel > > > > -- > > 1999-11-13: Hnags after: > > > > Transfering control to kernel. (At entry point 0x00010000) > > kernel(0x00148C80, 0x00504010, 0x00148C80, 0x00016640) > > Clear BSS 0x0011B048 --> 0x0013D384 > > Boot Loader: PA/Linux, maybe PALO > > real_mode setup exiting > > > > Hello Carl, > > Are you shure, that the outputs doesn´t go to the first COM-Port as default (in > which case you would never see something more on the screen)... > > Check /arch/parisc/boot/boot_code/ipl_c.c and search for " console=ttyS0 " ... > You would have to modify this (console=tty0) ** OR ** start the machine with > "boot pri isl" and modify the command-line. > > Helge Deller. -- Carl Johnson