From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
"Peng Fan (OSS)" <peng.fan@oss.nxp.com>,
Peng Fan <peng.fan@nxp.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"imx@lists.linux.dev" <imx@lists.linux.dev>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 2/2] nvmem: imx-ocotp-ele: Support accessing controller for i.MX9
Date: Wed, 22 Jan 2025 07:26:16 +0100 [thread overview]
Message-ID: <3890686.kQq0lBPeGt@steina-w> (raw)
In-Reply-To: <PAXPR04MB8459845E7D949680044E203188E12@PAXPR04MB8459.eurprd04.prod.outlook.com>
Am Mittwoch, 22. Januar 2025, 04:36:33 CET schrieb Peng Fan:
> > Subject: Re: [PATCH v6 2/2] nvmem: imx-ocotp-ele: Support accessing
> > controller for i.MX9
> >
> > Hi,
> >
> > Am Dienstag, 21. Januar 2025, 16:05:32 CET schrieb Peng Fan (OSS):
> > > From: Peng Fan <peng.fan@nxp.com>
> > >
> > > i.MX9 OCOTP supports a specific peripheral or function being fused
> > > which means disabled, so
> > > - Introduce ocotp_access_gates to be container of efuse gate info
> > > - Iterate all nodes to check accessing permission. If not
> > > allowed to be accessed, detach the node
> > >
> > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > > ---
> > > drivers/nvmem/Kconfig | 3 +
> > > drivers/nvmem/imx-ocotp-ele.c | 172
> > > +++++++++++++++++++++++++++++++++++++++++-
> > > 2 files changed, 174 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index
> > >
> > 8671b7c974b933e147154bb40b5d41b5730518d2..77cc496fd5e0e1af
> > d753534b56fe
> > > 1f5ef3e3ec55 100644
> > > --- a/drivers/nvmem/Kconfig
> > > +++ b/drivers/nvmem/Kconfig
> > > @@ -93,6 +93,9 @@ config NVMEM_IMX_OCOTP_ELE
> > > This is a driver for the On-Chip OTP Controller (OCOTP)
> > > available on i.MX SoCs which has ELE.
> > >
> > > + If built as modules, any other driver relying on this working
> > > + as access controller also needs to be a module as well.
> > > +
> > > config NVMEM_IMX_OCOTP_SCU
> > > tristate "i.MX8 SCU On-Chip OTP Controller support"
> > > depends on IMX_SCU
> > > diff --git a/drivers/nvmem/imx-ocotp-ele.c
> > > b/drivers/nvmem/imx-ocotp-ele.c index
> > >
> > ca6dd71d8a2e29888c6e556aaea116c1a967cb5f..5ea6d959ce38760ee
> > ed44a989992
> > > fb35c462c0b4 100644
> > > --- a/drivers/nvmem/imx-ocotp-ele.c
> > > +++ b/drivers/nvmem/imx-ocotp-ele.c
> > > @@ -5,6 +5,8 @@
> > > * Copyright 2023 NXP
> > > */
> > >
> > > +#include <dt-bindings/nvmem/fsl,imx93-ocotp.h>
> > > +#include <dt-bindings/nvmem/fsl,imx95-ocotp.h>
> > > #include <linux/device.h>
> > > #include <linux/io.h>
> > > #include <linux/module.h>
> > > @@ -27,6 +29,7 @@ struct ocotp_map_entry { };
> > >
> > > struct ocotp_devtype_data {
> > > + const struct ocotp_access_gates *access_gates;
> > > u32 reg_off;
> > > char *name;
> > > u32 size;
> > > @@ -36,6 +39,20 @@ struct ocotp_devtype_data {
> > > struct ocotp_map_entry entry[];
> > > };
> > >
> > > +#define OCOTP_MAX_NUM_GATE_WORDS 4
> > > +
> > > +struct access_gate {
> > > + u32 word;
> > > + u32 mask;
> > > +};
> > > +
> > > +struct ocotp_access_gates {
> > > + u32 num_words;
> > > + u32 words[OCOTP_MAX_NUM_GATE_WORDS];
> > > + u32 num_gates;
> > > + struct access_gate *gates;
> > > +};
> > > +
> > > struct imx_ocotp_priv {
> > > struct device *dev;
> > > void __iomem *base;
> > > @@ -131,6 +148,82 @@ static void
> > imx_ocotp_fixup_dt_cell_info(struct nvmem_device *nvmem,
> > > cell->read_post_process = imx_ocotp_cell_pp; }
> > >
> > > +static int imx_ele_ocotp_check_access(struct imx_ocotp_priv *priv,
> > > +u32 id) {
> > > + const struct ocotp_access_gates *access_gates = priv->data-
> > >access_gates;
> > > + void __iomem *reg = priv->base + priv->data->reg_off;
> > > + u32 word, mask, val;
> > > +
> > > + if (id >= access_gates->num_gates) {
> > > + dev_err(priv->config.dev, "Index %d too large\n", id);
> > > + return -EACCES;
> > > + }
> > > +
> > > + word = access_gates->gates[id].word;
> > > + mask = access_gates->gates[id].mask;
> > > +
> > > + reg = priv->base + priv->data->reg_off + (word << 2);
> > > + val = readl(reg);
> > > +
> > > + dev_dbg(priv->config.dev, "id:%d word:%d mask:0x%08x\n",
> > id, word, mask);
> > > + /* true means not allow access */
> > > + if (val & mask)
> > > + return -EACCES;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx_ele_ocotp_grant_access(struct imx_ocotp_priv *priv,
> > > +struct device_node *parent) {
> > > + struct device *dev = priv->config.dev;
> > > +
> > > + for_each_available_child_of_node_scoped(parent, child) {
> > > + struct of_phandle_args args;
> > > + u32 id, idx = 0;
> > > +
> > > + while (!of_parse_phandle_with_args(child, "access-
> > controllers",
> > > + "#access-
> > controller-cells",
> > > + idx++, &args)) {
> > > + of_node_put(args.np);
> > > + if (args.np != dev->of_node)
> > > + continue;
> > > +
> > > + /* Only support one cell */
> > > + if (args.args_count != 1) {
> > > + dev_err(dev, "wrong args count\n");
> > > + continue;
> > > + }
> > > +
> > > + id = args.args[0];
> > > +
> > > + dev_dbg(dev, "Checking node: %pOF
> > gate: %d\n", child, id);
> > > +
> > > + if (imx_ele_ocotp_check_access(priv, id)) {
> > > + of_detach_node(child);
> > > + dev_info(dev, "%pOF: Not granted,
> > device driver will not be probed\n",
> > > + child);
> > > + }
> > > + }
> > > +
> > > + imx_ele_ocotp_grant_access(priv, child);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx_ele_ocotp_access_control(struct imx_ocotp_priv *priv)
> > > +{
> > > + struct device_node *root __free(device_node) =
> > > +of_find_node_by_path("/");
> > > +
> > > + if (!priv->data->access_gates)
> > > + return 0;
> > > +
> > > + /* This should never happen */
> > > + WARN_ON(!root);
> >
> > Even if you warning something is wrong, aka root == NULL, you are still
> > using it on imx_ele_ocotp_grant_access(). Just return early.
> >
> > if (WARN_ON(!))
> > return -EINVAL;
>
> Hmm, If this really happens, return early or not does not make much sense.
> Does it really matter here?
Why does it not make much sense? You already know something is wrong, aka
you have a NULL pointer, so it makes even less sense to continue.
I've skipped through the sources and looked for 'WARN_ON(!<pointer>)',
most of the times it is actually checked for early returns.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2025-01-22 6:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-21 15:05 [PATCH v6 0/2] Make i.MX9 OCOTP work as accessing controller Peng Fan (OSS)
2025-01-21 15:05 ` [PATCH v6 1/2] dt-bindings: nvmem: imx-ocotp: Introduce #access-controller-cells Peng Fan (OSS)
2025-01-30 9:49 ` Alexander Stein
2025-01-21 15:05 ` [PATCH v6 2/2] nvmem: imx-ocotp-ele: Support accessing controller for i.MX9 Peng Fan (OSS)
2025-01-21 15:21 ` Alexander Stein
2025-01-22 3:36 ` Peng Fan
2025-01-22 6:26 ` Alexander Stein [this message]
2025-01-22 12:43 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3890686.kQq0lBPeGt@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.