From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id QAA01903 for ; Fri, 24 Mar 2000 16:33:26 -0700 Received: from libero.it (garfield.postai.it [192.168.1.2]) by router.postai.it (8.8.7/8.8.7) with ESMTP id WAA00792 for ; Fri, 24 Mar 2000 22:10:12 +0100 Sender: paolo@router.postai.it Message-ID: <38DBDC2F.61B809D9@libero.it> Date: Fri, 24 Mar 2000 22:20:47 +0100 From: Paolo MIME-Version: 1.0 To: "parisc-linux@thepuffingroup.com" Subject: Re: [parisc-linux] floppy disk drive for hp 712/100 References: <20000320150742.19786.qmail@mailserv2.iuinc.com> Content-Type: text/plain; charset=us-ascii List-ID: T.J.Yang wrote: > > Another question for my 712/100 wks. > I am thinking of putting a floppy disk drive into the > empty seond bay. The ioscan output strongly indicate > the floppy disk is a reqular PC floppy drive. > > on the hp mother board, the floppy disk connetion cable > looks alright with the pc one but the power cable is > different. It only has two wires while the PC one has > four. (That is why it is imporatent to locate the > 712/100 owner's/technical manual). > > I don't have the multimeter with me now to check on the > voltage. > > Perhaps someone done this before can help me out. > > Thanks again > > tj > > --------------------------------------------------------------------------- > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with > `unsubscribe' as the subject. Pc floppy-drive use only +5V, so it's enough two wires. +12V is unused, but present for other peripherals. -- Postai Paolo. Modena, Italy Key fingerprint = E8 5A 33 C8 45 1B 76 6C D2 95 51 E1 AD 27 D0 90 Pgp Key =