From: Riana Tauro <riana.tauro@intel.com>
To: dri-devel@lists.freedesktop.org, simona.vetter@ffwll.ch,
"David Airlie" <airlied@gmail.com>,
"Christian König" <christian.koenig@amd.com>,
"André Almeida" <andrealmeid@igalia.com>
Cc: <anshuman.gupta@intel.com>, <rodrigo.vivi@intel.com>,
<lucas.demarchi@intel.com>, <aravind.iddamsetty@linux.intel.com>,
<raag.jadav@intel.com>, <umesh.nerlige.ramappa@intel.com>,
<frank.scarbrough@intel.com>, <sk.anirban@intel.com>,
<maarten.lankhorst@linux.intel.com>, <mripard@kernel.org>,
<intel-xe@lists.freedesktop.org>, <tzimmermann@suse.de>
Subject: Re: [PATCH v7 1/9] drm: Add a vendor-specific recovery method to drm device wedged uevent
Date: Wed, 30 Jul 2025 19:33:01 +0530 [thread overview]
Message-ID: <39095bd1-2dee-4bfb-bc87-ee8cecedebce@intel.com> (raw)
In-Reply-To: <20250728102809.502324-2-riana.tauro@intel.com>
On 7/28/2025 3:57 PM, Riana Tauro wrote:
> Address the need for a recovery method (firmware flash on Firmware errors)
> introduced in the later patches of Xe KMD.
> Whenever XE KMD detects a firmware error, a firmware flash is required to
> recover the device to normal operation.
>
> The initial proposal to use 'firmware-flash' as a recovery method was
> not applicable to other drivers and could cause multiple recovery
> methods specific to vendors to be added.
> To address this a more generic 'vendor-specific' method is introduced,
> guiding users to refer to vendor specific documentation and system logs
> for detailed vendor specific recovery procedure.
>
> Add a recovery method 'WEDGED=vendor-specific' for such errors.
> Vendors must provide additional recovery documentation if this method
> is used.
>
> It is the responsibility of the consumer to refer to the correct vendor
> specific documentation and usecase before attempting a recovery.
>
> For example: If driver is XE KMD, the consumer must refer
> to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
>
> Recovery script contributed by Raag.
>
> v2: fix documentation (Raag)
> v3: add more details to commit message (Sima, Rodrigo, Raag)
> add an example script to the documentation (Raag)
> v4: use consistent naming (Raag)
> v5: fix commit message
>
> Cc: André Almeida <andrealmeid@igalia.com>
> Cc: Christian König <christian.koenig@amd.com>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Simona Vetter <simona.vetter@ffwll.ch>
> Co-developed-by: Raag Jadav <raag.jadav@intel.com>
> Signed-off-by: Raag Jadav <raag.jadav@intel.com>
> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch needs an ack from drm to be merged.
The rest of the series have RB's. Can someone please provide an ack ?
Cc: drm-misc maintainers
Thanks
Riana
> ---
> Documentation/gpu/drm-uapi.rst | 42 ++++++++++++++++++++++++++++------
> drivers/gpu/drm/drm_drv.c | 2 ++
> include/drm/drm_device.h | 4 ++++
> 3 files changed, 41 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
> index 843facf01b2d..5691b29acde3 100644
> --- a/Documentation/gpu/drm-uapi.rst
> +++ b/Documentation/gpu/drm-uapi.rst
> @@ -418,13 +418,15 @@ needed.
> Recovery
> --------
>
> -Current implementation defines three recovery methods, out of which, drivers
> +Current implementation defines four recovery methods, out of which, drivers
> can use any one, multiple or none. Method(s) of choice will be sent in the
> uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in order of less to
> -more side-effects. If driver is unsure about recovery or method is unknown
> -(like soft/hard system reboot, firmware flashing, physical device replacement
> -or any other procedure which can't be attempted on the fly), ``WEDGED=unknown``
> -will be sent instead.
> +more side-effects. If recovery method is specific to vendor
> +``WEDGED=vendor-specific`` will be sent and userspace should refer to vendor
> +specific documentation for the recovery procedure. As an example if the driver
> +is 'Xe' then the documentation for 'Device Wedging' of Xe driver needs to be
> +referred for the recovery procedure. If driver is unsure about recovery or
> +method is unknown, ``WEDGED=unknown`` will be sent instead.
>
> Userspace consumers can parse this event and attempt recovery as per the
> following expectations.
> @@ -435,6 +437,7 @@ following expectations.
> none optional telemetry collection
> rebind unbind + bind driver
> bus-reset unbind + bus reset/re-enumeration + bind
> + vendor-specific vendor specific recovery method
> unknown consumer policy
> =============== ========================================
>
> @@ -472,8 +475,12 @@ erroring out, all device memory should be unmapped and file descriptors should
> be closed to prevent leaks or undefined behaviour. The idea here is to clear the
> device of all user context beforehand and set the stage for a clean recovery.
>
> -Example
> --------
> +For ``WEDGED=vendor-specific`` recovery method, it is the responsibility of the
> +consumer to check the driver documentation and the usecase before attempting
> +a recovery.
> +
> +Example - rebind
> +----------------
>
> Udev rule::
>
> @@ -491,6 +498,27 @@ Recovery script::
> echo -n $DEVICE > $DRIVER/unbind
> echo -n $DEVICE > $DRIVER/bind
>
> +Example - vendor-specific
> +-------------------------
> +
> +Udev rule::
> +
> + SUBSYSTEM=="drm", ENV{WEDGED}=="vendor-specific", DEVPATH=="*/drm/card[0-9]",
> + RUN+="/path/to/vendor_specific_recovery.sh $env{DEVPATH}"
> +
> +Recovery script::
> +
> + #!/bin/sh
> +
> + DEVPATH=$(readlink -f /sys/$1/device)
> + DRIVERPATH=$(readlink -f $DEVPATH/driver)
> + DRIVER=$(basename $DRIVERPATH)
> +
> + if [ "$DRIVER" = "xe" ]; then
> + # Refer XE documentation and check usecase and recovery procedure
> + fi
> +
> +
> Customization
> -------------
>
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index cdd591b11488..0ac723a46a91 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -532,6 +532,8 @@ static const char *drm_get_wedge_recovery(unsigned int opt)
> return "rebind";
> case DRM_WEDGE_RECOVERY_BUS_RESET:
> return "bus-reset";
> + case DRM_WEDGE_RECOVERY_VENDOR:
> + return "vendor-specific";
> default:
> return NULL;
> }
> diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
> index a33aedd5e9ec..59fd3f4d5995 100644
> --- a/include/drm/drm_device.h
> +++ b/include/drm/drm_device.h
> @@ -26,10 +26,14 @@ struct pci_controller;
> * Recovery methods for wedged device in order of less to more side-effects.
> * To be used with drm_dev_wedged_event() as recovery @method. Callers can
> * use any one, multiple (or'd) or none depending on their needs.
> + *
> + * Refer to "Device Wedging" chapter in Documentation/gpu/drm-uapi.rst for more
> + * details.
> */
> #define DRM_WEDGE_RECOVERY_NONE BIT(0) /* optional telemetry collection */
> #define DRM_WEDGE_RECOVERY_REBIND BIT(1) /* unbind + bind driver */
> #define DRM_WEDGE_RECOVERY_BUS_RESET BIT(2) /* unbind + reset bus device + bind */
> +#define DRM_WEDGE_RECOVERY_VENDOR BIT(3) /* vendor specific recovery method */
>
> /**
> * struct drm_wedge_task_info - information about the guilty task of a wedge dev
next prev parent reply other threads:[~2025-07-30 14:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-28 10:27 [PATCH v7 0/9] Handle Firmware reported Hardware Errors Riana Tauro
2025-07-28 10:27 ` [PATCH v7 1/9] drm: Add a vendor-specific recovery method to drm device wedged uevent Riana Tauro
2025-07-30 14:03 ` Riana Tauro [this message]
2025-07-31 9:32 ` Maxime Ripard
2025-07-31 11:13 ` Riana Tauro
2025-07-31 13:01 ` Maxime Ripard
2025-07-31 13:48 ` Riana Tauro
2025-08-05 14:36 ` Rodrigo Vivi
2025-08-05 14:57 ` Rodrigo Vivi
2025-08-08 8:02 ` Riana Tauro
2025-08-19 11:21 ` Maxime Ripard
2025-07-28 10:27 ` [PATCH v7 2/9] drm/xe: Set GT as wedged before sending " Riana Tauro
2025-07-28 10:27 ` [PATCH v7 3/9] drm/xe: Add a helper function to set recovery method Riana Tauro
2025-07-28 10:27 ` [PATCH v7 4/9] drm/xe/xe_survivability: Refactor survivability mode Riana Tauro
2025-07-28 10:27 ` [PATCH v7 5/9] drm/xe/xe_survivability: Add support for Runtime " Riana Tauro
2025-07-28 10:27 ` [PATCH v7 6/9] drm/xe/doc: Document device wedged and runtime survivability Riana Tauro
2025-07-28 10:27 ` [PATCH v7 7/9] drm/xe: Add support to handle hardware errors Riana Tauro
2025-07-28 10:27 ` [PATCH v7 8/9] drm/xe/xe_hw_error: Handle CSC Firmware reported Hardware errors Riana Tauro
2025-07-28 10:27 ` [PATCH v7 9/9] drm/xe/xe_hw_error: Add fault injection to trigger csc error handler Riana Tauro
2025-07-28 16:18 ` ✗ CI.checkpatch: warning for Handle Firmware reported Hardware Errors (rev7) Patchwork
2025-07-28 16:20 ` ✓ CI.KUnit: success " Patchwork
2025-07-28 16:34 ` ✗ CI.checksparse: warning " Patchwork
2025-07-28 17:01 ` ✓ Xe.CI.BAT: success " Patchwork
2025-07-28 19:12 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39095bd1-2dee-4bfb-bc87-ee8cecedebce@intel.com \
--to=riana.tauro@intel.com \
--cc=airlied@gmail.com \
--cc=andrealmeid@igalia.com \
--cc=anshuman.gupta@intel.com \
--cc=aravind.iddamsetty@linux.intel.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=frank.scarbrough@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=raag.jadav@intel.com \
--cc=rodrigo.vivi@intel.com \
--cc=simona.vetter@ffwll.ch \
--cc=sk.anirban@intel.com \
--cc=tzimmermann@suse.de \
--cc=umesh.nerlige.ramappa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.