All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001582]: hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
Date: Tue, 22 Nov 2005 21:43:36 +0100	[thread overview]
Message-ID: <3922ffde31b6fac21d47da46c08d2a53@bugtrack.alsa-project.org> (raw)


A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1582> 
======================================================================
Reported By:                fastip
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Issue ID:                   1582
Category:                   PCI - hda-intel
Reproducibility:            always
Severity:                   block
Priority:                   normal
Status:                     assigned
Distribution:               Gentoo
Kernel Version:             Linux solo 2.6.13-gentoo-r3 #3 SMP Wed Oct 12
16:01:15 CEST 2005 x86_64
======================================================================
Date Submitted:             11-20-2005 11:10 CET
Last Modified:              11-22-2005 21:43 CET
======================================================================
Summary:                    hda_codec: Unknown model for ALC880, trying
auto-probe from BIOS...
Description: 
I have a Abit Fatal1ty AA8XE, with intel 925XE + ICH6 chipset and a intel
HDA, and sound system does not work:

dmesg output:

[...]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
[...]

lspci:

00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev
0e)
00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port (rev
0e)
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA
Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600]
(rev a2)
02:01.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet
Controller (rev 05)
02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
Controller (PHY/Link)
02:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100
VE Ethernet Controller (rev 04)

lspci -vvv -s 00:1b.0 :
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
        Subsystem: ABIT Computer Corp. Unknown device 103e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 08
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at fdff8000 (64-bit, non-prefetchable)
[size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown,
Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

cat /proc/asound/cards
0 [Intel          ]: HDA-Intel - HDA Intel
                     HDA Intel at 0xfdff8000 irq 169

cat /proc/asound/devices
 17: [0- 1]: digital audio playback
 25: [0- 1]: digital audio capture
 16: [0- 0]: digital audio playback
 24: [0- 0]: digital audio capture
  0: [0- 0]: ctl
  1:       : sequencer
 33:       : timer

cat /proc/asound/timers
G0: system timer : 1000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
P0-0-3: PCM capture 0-0-3 : SLAVE
P0-1-0: PCM playback 0-1-0 : SLAVE
P0-1-1: PCM capture 0-1-1 : SLAVE

I've tryed to use module options same as thread:
 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1453

but i think this is not the case of a duplicate thread...
position_fix=2 and model=3stack options does not work for me!
======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
duplicate of        0000790 no sound with azx driver in Realtek int...
======================================================================

----------------------------------------------------------------------
 mbab - 11-22-05 21:43 
----------------------------------------------------------------------
This looks like the problem i am having. Sound hardware seems to be the
same too.

Issue History
Date Modified  Username       Field                    Change              
======================================================================
11-20-05 11:10 fastip         New Issue                                    
11-20-05 11:10 fastip         Distribution              => Gentoo          
11-20-05 11:10 fastip         Kernel Version            => Linux solo
2.6.13-gentoo-r3 #3 SMP Wed Oct 12 16:01:15 CEST 2005 x86_64
11-22-05 19:18 rlrevell       Relationship added       duplicate of 0000790
11-22-05 21:42 mbab           Issue Monitored: mbab                        
11-22-05 21:43 mbab           Note Added: 0006802                          
======================================================================




-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click

             reply	other threads:[~2005-11-22 20:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-22 20:43 bugtrack [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-12-19  1:24 [ALSA - driver 0001582]: hda_codec: Unknown model for ALC880, trying auto-probe from BIOS bugtrack
2005-11-23 19:20 bugtrack
2005-11-22 18:18 bugtrack
2005-11-20 10:10 bugtrack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3922ffde31b6fac21d47da46c08d2a53@bugtrack.alsa-project.org \
    --to=bugtrack@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.