From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Macpaul Lin <macpaul.lin@mediatek.com>,
Chen-Yu Tsai <wenst@chromium.org>
Cc: Chen-Yu Tsai <wenst@chromium.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: usb: ti,usb8041: Fold in TI USB8020B
Date: Tue, 03 Nov 2026 12:16:17 +0100 [thread overview]
Message-ID: <3928338.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20261103095425.3097720-1-wenst@chromium.org>
Am Dienstag, 3. November 2026, 10:53:29 Mitteleuropäische Normalzeit schrieb Chen-Yu Tsai:
> TI USB8020B is another USB 3.0 hub that currently has a separate yet
> similar, albeit more limited binding.
>
> Fold the TI USB8020B compatibles into the TI USB8041 binding, thus
> allowing the TI USB8020B to correctly allow downstream ports through
> the common USB hub binding.
>
> The requirement of "peer-hub" is relaxed, as done in commit e44297dd2b75
> ("dt-bindings: usb: ti,usb8041: Support nested USB hubs"). The hub chip
> might only have its HighSpeed data lines connected, and thus would not
> have a SuperSpeed peer hub.
>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Looks good to me:
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> Cc: Macpaul Lin <macpaul.lin@mediatek.com>
> ---
> .../devicetree/bindings/usb/ti,usb8020b.yaml | 69 -------------------
> .../devicetree/bindings/usb/ti,usb8041.yaml | 5 +-
> 2 files changed, 4 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
> deleted file mode 100644
> index 61217da8b2f3..000000000000
> --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
> +++ /dev/null
> @@ -1,69 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: TI USB8020B USB 3.0 hub controller
> -
> -maintainers:
> - - Macpaul Lin <macpaul.lin@mediatek.com>
> -
> -allOf:
> - - $ref: usb-device.yaml#
> -
> -properties:
> - compatible:
> - enum:
> - - usb451,8025
> - - usb451,8027
> -
> - reg: true
> -
> - reset-gpios:
> - items:
> - - description: GPIO specifier for GRST# pin.
> -
> - vdd-supply:
> - description:
> - VDD power supply to the hub
> -
> - peer-hub:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description:
> - phandle to the peer hub on the controller.
> -
> -required:
> - - compatible
> - - reg
> - - peer-hub
> -
> -additionalProperties: false
> -
> -examples:
> - - |
> - #include <dt-bindings/gpio/gpio.h>
> -
> - usb {
> - dr_mode = "host";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* 2.0 hub on port 1 */
> - hub_2_0: hub@1 {
> - compatible = "usb451,8027";
> - reg = <1>;
> - peer-hub = <&hub_3_0>;
> - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
> - vdd-supply = <&usb_hub_fixed_3v3>;
> - };
> -
> - /* 3.0 hub on port 2 */
> - hub_3_0: hub@2 {
> - compatible = "usb451,8025";
> - reg = <2>;
> - peer-hub = <&hub_2_0>;
> - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
> - vdd-supply = <&usb_hub_fixed_3v3>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> index 07e13fae640b..74021d13a43a 100644
> --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
> @@ -4,10 +4,11 @@
> $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: TI USB8041 and USB8044 USB 3.0 hub controllers
> +title: TI USB80xx USB 3.0 hub controllers
>
> maintainers:
> - Alexander Stein <alexander.stein@ew.tq-group.com>
> + - Macpaul Lin <macpaul.lin@mediatek.com>
>
> allOf:
> - $ref: usb-device.yaml#
> @@ -16,6 +17,8 @@ allOf:
> properties:
> compatible:
> enum:
> + - usb451,8025
> + - usb451,8027
> - usb451,8140
> - usb451,8142
> - usb451,8440
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
prev parent reply other threads:[~2026-11-03 11:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 9:53 [PATCH] dt-bindings: usb: ti,usb8041: Fold in TI USB8020B Chen-Yu Tsai
2026-11-03 9:57 ` sashiko-bot
2026-11-03 11:16 ` Alexander Stein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3928338.mvXUDI8C0e@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=macpaul.lin@mediatek.com \
--cc=robh@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.