Re: allocating non-cacheable regions

[Steve Rossi <srossi@ccrl.mot.com>]

Well I found the solution - I needed to added an  extern
invalidate_dcache_range() declaration to include/asm/cache.h then the kernel will
compile with invalidate_dcache_range exported in ppc_ksyms.c (contrary to what
I reported, my problem with compiling the device driver as a module was that the
kernel wouldn't compile with invalidate_dcache_range exported - not that it
wouldn't boot. I just wasn't remembering correctly when I wrote that.) Now I can
compile the driver as a module with invalidate_dcache_range and it works!

My problem with the kernel not booting was actually related to compiling the
driver into the kernel. I have to investigate this further because it used to
work.

Steve


Steve Rossi wrote:

> Dan Malek wrote:
>
> >
> > > .... How can I make it so that
> > > reads as well as writes to a particular page bypass the cache?
> >
> > You need to invalidate the data cache for this address and the TLB
> > entry for this address when you set the flag.  Those drivers in your
> > example get away with it because the caches/TLB have been invalidated
> > and not yet touched at this point.  You also need to ensure you are not
> > multiple mapping the same physical address....
> >
>
> I'm invalidating the TLB entry via a call to flush_tlb_page as in the examples
> that you pointed me to - which simply maps to tlbia on 8xx. But I haven't yet
> figured out how to invalidate the data cache for the entire page. I'm trying
> invalidate_dcache_range() - but I'm having really strange problems with it. If
> I compile the driver into the kernel with a call to invalidate_dcache_range(),
> the kernel won't boot. (It'll get as far as "Uncompressing Linux ..." and
> it'll hang). The same happens if I export invalidate_dcache_range in
> ppc_ksyms.c in an attempt to load the driver as a module. I haven't looked
> into what is going on here - but I do know that it is being caused by the
> invalidate_dcache_range being present. Am I totally off base here? Should
> I even be using invalidate_dcache_range or is there another method for
> invalidating the data cache? A pointer to an example would be sufficient if
> anyone has one.
>
> Thanks,
> Steve
>
> --
> -------------------------------------------------------
> Steven K. Rossi                     srossi@ccrl.mot.com
> Staff Engineer
> Multimedia Communications Research Laboratory
> Motorola Labs
> -------------------------------------------------------
>

--
-------------------------------------------------------
Steven K. Rossi                     srossi@ccrl.mot.com
Staff Engineer
Multimedia Communications Research Laboratory
Motorola Labs
-------------------------------------------------------


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/