All of lore.kernel.org
 help / color / mirror / Atom feed
From: Newsy Paper <newspaperman_germany@yahoo.com>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Re : Re : TT S2-3200 driver
Date: Thu, 2 Oct 2008 13:52:30 +0000 (GMT)	[thread overview]
Message-ID: <395581.38574.qm@web23201.mail.ird.yahoo.com> (raw)
In-Reply-To: <1a18e9e80810011521o35f59ba5k658ab5f2c70cbfeb@mail.gmail.com>

I didn't experience any differences with dvb-s2 channels.
Those problematic transponders always produces corrupted video streams. It's always DVB-s2 30000 3/4. When entering SR of 29999 I get constant lock, but the stream is corrupted. 1 HD channel has only a VideoRate of 4,5 MBit and audio 77 kbit/s :(


kind regards

Newsy

--- Meysam Hariri <meysam.hariri@gmail.com> schrieb am Do, 2.10.2008:

> Von: Meysam Hariri <meysam.hariri@gmail.com>
> Betreff: [linux-dvb]  Re : Re : TT S2-3200 driver
> An: linux-dvb@linuxtv.org
> Datum: Donnerstag, 2. Oktober 2008, 0:21
> Hi,
> 
> thanks for your update. i used a TT-3200 device and
> here's the results:
> - i couldn't lock on some S2 channels or those
> 'bad' channels, although i
> could get unstable lock on these channels using the
> unpatched version, but
> resulting in corrupted data. so the unpatched version still
> works a bit
> better.
> - the lock on QPSK S2 channels is fast and stable as it was
> with the
> unpatched version
> - locking on dvb-s channels is also fast and stable
> 
> i'm ready to test any further updates.
> 
> Regards,
> 
> 
> 2008/10/1 Alex Betis <alex.betis@gmail.com>
> 
> Hi all,
> >
> > My description of the solution is here:
> >
> http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
> >
> > I've also attaching the patches to this thread.
> >
> > Several people reported better lock on DVB-S channels.
> >
> > Just to clarify it, the changes mostly affect DVB-S
> channels scanning, it
> > doesn't help with DVB-S2 locking problem since the
> code is totally different
> > for S and S2 signal search.
> >
> > I've increased a timer for S2 signal search and
> decreased the search step,
> > this helps to lock on "good" S2 channels
> that were locked anyway with
> > several attempts, but this time it locks from first
> attempt. The "bad"
> > channels finds the signal, but the FEC is unable to
> lock.
> > Since searching of S2 channels is done in the card and
> not in the driver,
> > its pretty hard to know what is going on there.
> >
> > Can't say what happens with the lock on
> "good" channels since I don't have
> > any S2 FTA in my sight.
> >
> > If anyone has any progress with S2 lock, let me know,
> I'd like to join the
> > forces.
> >
> >
> >
> > On Tue, Sep 30, 2008 at 12:48 PM, Alex Betis
> <alex.betis@gmail.com> wrote:
> >
> >> I'll send the patches to the list as soon as
> I'll finish some more
> >> debugging and clean the code from all the garbage
> I've added there.
> >>
> >> Meanwhile I'd also like to wait for few people
> responses who test those
> >> patches. So far one person with Twinhan 1041 card
> confirmed that the changes
> >> "improved a lot" the locking. Waiting
> for few more people with TT S2-3200 to
> >> confirm it.
> >>
> >>
> >> On Tue, Sep 30, 2008 at 12:35 PM, Newsy Paper <
> >> newspaperman_germany@yahoo.com> wrote:
> >>
> >>> Hi Alex!
> >>>
> >>> This souds like good news!
> >>> Hope you could help us with a patch from you.
> >>>
> >>> kind regards
> >>>
> >>>
> >>> Newsy
> >>>
> >>>
> >>> --- Alex Betis <alex.betis@gmail.com>
> schrieb am Mo, 29.9.2008:
> >>>
> >>> > Von: Alex Betis
> <alex.betis@gmail.com>
> >>> > Betreff: Re: [linux-dvb] Re : Re : TT
> S2-3200 driver
> >>> > An: "Jelle De Loecker"
> <skerit@kipdola.com>
> >>> > CC: "linux-dvb"
> <linux-dvb@linuxtv.org>
> >>> > Datum: Montag, 29. September 2008, 16:13
> >>> > Does that card use stb0899 drivers as
> Twinhan 1041?
> >>> >
> >>> > I've done some changes to the
> algorithm that provide
> >>> > constant lock.
> >>> >
> >>> > 2008/9/29 Jelle De Loecker
> <skerit@kipdola.com>
> >>> >
> >>> > >
> >>> > > manu schreef:
> >>> > >
> >>> > > Le 13.09.2008 19:10:31, Manu Abraham
> a écrit :
> >>> > >
> >>> > >
> >>> > >  manu wrote:
> >>> > >
> >>> > >
> >>> > >  I forgot the logs...
> >>> > >
> >>> > >
> >>> > >  Taking a look at it. Please do note
> that, i will have
> >>> > to go through
> >>> > > it
> >>> > > very patiently.
> >>> > >
> >>> > > Thanks for the logs.
> >>> > >
> >>> > >
> >>> > >
> >>> > >  You're more than welcome. I
> tried to put some
> >>> > printk's but the only
> >>> > > thing I got is that even when the
> carrier is correctly
> >>> > detected, the
> >>> > > driver does not detect the data
> (could that be related
> >>> > to the different
> >>> > > FEC?).
> >>> > > Anyway let me know if you need more
> testing.
> >>> > > Bye
> >>> > > Manu
> >>> > >
> >>> > >
> >>> > > I'm unable to scan the channels
> on the Astra 23,5
> >>> > satellite
> >>> > > Frequency 11856000
> >>> > > Symbol rate 27500000
> >>> > > Vertical polarisation
> >>> > > FEC 5/6
> >>> > >
> >>> > > Is this because of the same bug? I
> should be getting
> >>> > Discovery Channel HD,
> >>> > > National Geographic Channel HD,
> Brava HDTV and Voom HD
> >>> > International, but
> >>> > > I'm only getting a time out.
> >>> > >
> >>> > >
> >>> > > *Met vriendelijke groeten,*
> >>> > >
> >>> > > *Jelle De Loecker*
> >>> > > Kipdola Studios - Tomberg
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> _______________________________________________
> >>> > > linux-dvb mailing list
> >>> > > linux-dvb@linuxtv.org
> >>> > >
> >>> >
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>> > >
> >>> >
> _______________________________________________
> >>> > linux-dvb mailing list
> >>> > linux-dvb@linuxtv.org
> >>> >
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> _______________________________________________
> >>> linux-dvb mailing list
> >>> linux-dvb@linuxtv.org
> >>>
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>>
> >>
> >>
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org
> >
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


      __________________________________________________________
Gesendet von Yahoo! Mail.
Dem pfiffigeren Posteingang.
http://de.overview.mail.yahoo.com


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-10-02 13:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-09 14:31 [linux-dvb] TT S2-3200 driver lucian orasanu
2008-09-09 22:40 ` [linux-dvb] Re : " manu
2008-09-13 17:29 ` manu
2008-09-13 17:37 ` manu
2008-09-13 23:10   ` Manu Abraham
2008-09-14  1:10     ` [linux-dvb] Re : " manu
2008-09-29 13:13       ` Jelle De Loecker
2008-09-29 14:13         ` Alex Betis
2008-09-29 19:10           ` [linux-dvb] Re : " Emmanuel ALLAUD
2008-09-30  9:35           ` [linux-dvb] " Newsy Paper
2008-09-30  9:48             ` Alex Betis
2008-09-30 20:34               ` Harald Becherer
2008-10-01 14:28               ` Alex Betis
     [not found]                 ` <1a18e9e80810011520k439bf72cqb8bb679588c79d8c@mail.gmail.com>
2008-10-01 22:21                   ` Meysam Hariri
2008-10-02 13:52                     ` Newsy Paper [this message]
2008-10-02 14:07                       ` Alex Betis
2008-10-02  7:53                 ` Алексей Субботин
2008-09-29 19:10         ` [linux-dvb] Re : " Emmanuel ALLAUD
  -- strict thread matches above, loose matches on Subject: below --
2008-09-07 21:01 [linux-dvb] " Manu Abraham
2008-09-07 23:10 ` [linux-dvb] Re : " manu
2008-09-09 13:49   ` Newsy Paper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=395581.38574.qm@web23201.mail.ird.yahoo.com \
    --to=newspaperman_germany@yahoo.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.