[U-Boot-Users] the question about u-boot for 1GB DDR-1?

[郭劲 <guojin02@tsinghua.org.cn>]

Hi,Denk,


I resolved the 1GB DDR problem, the reason is that I did not define the
CONFIG_VERY_BIG_RAM. The u-boot-1.2.0 will visit the address above
0x10000000(256MB) if this CONFIG_VERY_BIG_RAM is not defined,then the u-boot-1.2.0
is dead.

Thank you very much.



>From: Wolfgang Denk <wd@denx.de>
>Reply-To: 
>To: <guojin02@tsinghua.org.cn>
>Subject: Re: [U-Boot-Users] the question about u-boot for 1GB DDR-1?
>Date:Tue, 20 Nov 2007 09:59:55 +0100
>
>In message <395543860.30931@tsinghua.org.cn> you wrote:
>> I plug in 1GB DDR-1 on DIMM-184 slot, my cpu is MPC8360, the u-boot just only
>> visit the address from 0x00000000 to 0x10000000(256MB), it can not visit the
>> address above 0x10000000, could you tell me why? and how to reslove this
problem?
>
>This has been recently dicussed here, please see the archive.
>
>What exactly is your problem? I think 256MB should be sufficient  for
>anything  you want to do in a boot loader (and Linux should then have
>access to the full memory size).
>
>
>Best regards,
>
>Wolfgang Denk
>
>-- 
>DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>Q: What do you get when you cross an ethernet with an income statement?
>A: A local area networth.
>