From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <398E11CA.A95426B8@phlo.net> Date: Sun, 06 Aug 2000 21:32:58 -0400 From: Bill Jackson MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: quik/kernel interaction Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: i have tried to upgrade my kernel from 2.2.15 to 2.2.17(test 5 and benh) or 2.4.0. I am able to get the kernels to compile, but they won't boot. I have modified my quik.conf file and reran quik. with any of the new kernels I have made (I also made the existing 2.2.15 kernel), i get the quik boot screen and select the kernel I wish to boot and the screen goes to the "copying OF device tree....done", then says 'booting', but then it locks up. i never get the actual kernel to load....at one point, i was getting a returning from prom_init message, but I no longer get that message. I also at one point got messages "Initializing Fake screen" and "Failed to get address", followed by a "returning from prom_init" message...but the kernel never actually loads...I have /boot on /dev/sda2 and have tried everything I can think of to fix this. I have used multiple kernels as I thought the problem was kernel related (first occured when I went to 2.4.0, that didn't work, so I tried 2.2.17, that didn't work, so I got 2.2.17-benh, that didn't work either). Since all these kernels are displaying the same problem, I think I am doing something wrong, but I don't know what....any assistance/offers/ideas are greatly appreciated... ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/