Firmware Version 37.28 Duplex Console IO Dependent Code (IODC) revision 0 ------------------------------------------------------------------------------ (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State Coprocessor State Cache Size --------- -------- --------------------- ----------------- ---------- 0 160 MHz Active Functional 512 KB 1 160 MHz Idle Functional 512 KB Central Bus Speed (in MHz) : 120 Model: D270/2 Available memory (bytes) : 1073741824 Good memory required (bytes): 85504000 Primary boot path: 8/12.5 (dec) Alternate boot path: 8/16/5.0 (dec) Console path: 8/12/0.0 (dec) Keyboard path: 8/16/7.0 (dec) CPU 0 WARNING: Memory has been initialized, but not tested as a result of FASTBOOT being enabled. To test memory, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. ------- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ------- Main Menu: Enter command > Search Searching for potential boot device(s)... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Path Number Device Path (dec) Device Type ----------- ----------------- ----------- P0 8/12.5 Random access media P1 8/12.8 Random access media P2 8/16/5.2 Random access media P3 8/16/6.0 LAN Module Main Menu: Enter command > bo P2 Interact with IPL (Y, N, or Cancel)?> N Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000 0/vmlinux 2349352 bytes @ 0x6f6000 0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0' Kernel: partition 0 file /vmlinux ELF32 executable Entry 00100000 first 00100000 n 4 Segment 0 load 00100000 size 1511580 mediaptr 0x1000 Segment 1 load 00272000 size 132368 mediaptr 0x173000 Segment 2 load 00294000 size 86880 mediaptr 0x194000 Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000 branching to kernel entry point 0x00100000 pdc_cons registered ! The Kernel has started... Free memory starts at: 0xc02dc000 PALO command line: 'TERM=linux HOME=/ root=/dev/scd0' PALO initrd 0-0 FP CCR was 0x0, will be set to 0xc0 model 00005a30 00000491 00000000 00000002 775c3955 100000f0 00000008 000000b22vers 00000205 cpuid 000001c9 CPUID vers 14 rev 9 CPU(s): 1 x PA8000 at 160.000000 MHz Searching for devices in PDC firmware... a newer box... Found devices: 1. UL 350 Lasi Core BA (11) at 0xffd00000, versions 0x2e, 0x0, 0x81, 0x0, 0x0 2. UL 350 Lasi Core RS-232 (10) at 0xffd05000, versions 0x2e, 0x0, 0x8c, 0x0, 003. UL 350 Core SCSI (10) at 0xffd06000, versions 0x2e, 0x0, 0x82, 0x0, 0x80 4. UL 350 Core LAN (802.3) (10) at 0xffd07000, versions 0x2e, 0x0, 0x8a, 0x0, 005. UL 350 Core Centronics (10) at 0xffd02000, versions 0x2e, 0x0, 0x74, 0x0, 0x06. UL 350 Core PC Keyboard (10) at 0xffd08000, versions 0x2e, 0x0, 0x84, 0x0, 007. UL 350 Core PC Keyboard (10) at 0xffd08100, versions 0x2e, 0x0, 0x84, 0x0, 008. UL 350 Core Wax BA (11) at 0xffe00000, versions 0x30, 0x0, 0x8e, 0x0, 0x0 9. UL 350 Wax EISA BA (11) at 0xfc000000, versions 0x30, 0x0, 0x90, 0x0, 0x0 10. UL 350 Wax Core RS-232 (10) at 0xffe02000, versions 0x30, 0x0, 0x8c, 0x0, 00That's a total of 10 devices. Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707 (experimental)0initrd: 00000000-00000000 pagetable_init On node 0 totalpages: 32768 zone(0): 16384 pages. zone(1): 16384 pages. zone(2): 0 pages. trap_init Calibrating delay loop... 292.45 BogoMIPS Memory: 125696k available Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) kmem_create: Poisoning requested, but con given - bdev_cache Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) kmem_create: Poisoning requested, but con given - inode_cache POSIX conformance testing by UNIFIX Lasi version 0 at 0xffd00000 found. request_irq(258, c01ec76c, 0x0, lasi, c7ff9080) Wax at 0xffe00000 found. request_irq(263, c01ec76c, 0x0, wax, c7ff9140) request_irq(797, c01ec994, 0x0, wax_hil_nmi, 00000000) Wax: HIL Keyboard-NMI registered. parport0: PC-style at 0xffd02800, irq 536 [PCSPP,TRISTATE] request_irq(536, c01ecac8, 0x0, parport0, c7ffcc00) Found i82596 at 0xffd07000, IRQ 535 early initialization of device eth0 is deferred Initializing lasi keyboard port at 0xffd08000... request_irq(517, c01ae2fc, 0x0, GSC PS/2, ffd08000) Initializing lasi mouse port at 0xffd08100... Linux NET4.0 for Linux 2.3 Based upon Swansea University Computer Society NET3.039 kmem_create: Poisoning requested, but con given - skbuff_head_cache NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) Starting kswapd v1.6 pty: 256 Unix98 ptys configured lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize sim700: Couldn't get consistent shared memory sim700: Configuring 53c710 (SCSI-ID 7) at ffd06100, IRQ 534 scsi0: Revision 0x2 Post test1, istat 01, sstat0 00, dstat 84 sim700: WARNING IRQ probe failed, (returned 0) scsi0: WARNING: target data areas are not dma coherent! scsi0: test 1 completed ok. request_irq(534, c01da868, 0x20000000, sim700, c7f8d260) scsi0: sim700_intr_handle() called with no interrupt scsi0 : LASI/Simple 53c700 scsi : 1 host. Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 1347 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 scsi : detected 1 SCSI cdrom total. Uniform CD-ROM driver Revision: 3.08 82596: 6 0 0 at c028cc10 82596: 6 ffd07000 217 at c7ffca00 eth0: 82596 at 0xffd07000, 08 00 09 55 5A 62 IRQ 535. 82596.c $Revision: 1.9 $ Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI endFound serial #0 at 0xffd05000, IRQ 538 ttyS00 at iomem 0xffd05800 (irq = 538) is a 16550A Found serial #1 at 0xffe02000, IRQ 793 ttyS01 at iomem 0xffe02800 (irq = 793) is a 16550A pdc_cons die !! kmem_create: Forcing size word alignment - nfs_fh VFS: Disk change detected on device sr(11,0) ISO 9660 Extensions: RRIP_1991A VFS: Mounted root (iso9660 filesystem) readonly. request_irq(538, c019e908, 0x4000000, serial, c02c976c) execve /sbin/init c0272008 c0272030 Fri Aug 4 01:33:00 /home/bame/xc/hppa 2000 dd: /dev/zero: Bad address 0+0 records in 0+0 records out mke2fs 1.19-WIP, 7-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev.Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 1024 inodes, 4096 blocks 0 blocks (0.00%) reserved for the super user First data block=1 1 block group 8192 blocks per group, 8192 fragments per group 1024 inodes per group Writing inode tables: done Writing superblocks and filesystem accounting information: done Welcome to PA/Linux release 0.1 (release 0.1 means don't expect much from it!) In addition to the bootable image, this CD contains cross compilers, source code, and documentation. You can initialize a bootable PA-RISC hard disk from this CD too. Read /README to find out more. Since progress never stops, by the time you boot this it'll be out of date, so check out http://www.thepuffingroup.com/parisc/ for the latest. Login as a superuser login: root password: root or as a normal user login: demo password: demo (none) login: root Password: Most of the programs included with the Debian GNU/Linux system are freely redistributable; the exact distribution terms for each program are described in the individual files in /usr/doc/*/copyright Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. sh: can't access tty; job control turned off # pwd /root # cd / # ls -al total 213 dr-xr-xr-x 18 root root 4096 Aug 4 2000 . dr-xr-xr-x 18 root root 4096 Aug 4 2000 .. -r--r--r-- 1 root root 1962 Aug 4 2000 README -r--r--r-- 1 root root 3678 Aug 4 2000 README.INSTALL dr-xr-xr-x 2 root root 4096 Aug 4 00:35 bin dr-xr-xr-x 2 root root 2048 Aug 3 19:19 boot dr-xr-xr-x 2 root root 163840 Aug 4 2000 dev dr-xr-xr-x 5 root root 4096 Aug 4 2000 etc dr-xr-xr-x 2 root root 2048 Jun 15 00:10 home dr-xr-xr-x 2 root root 2048 Aug 3 16:50 include dr-xr-xr-x 2 root root 2048 Jun 15 00:10 lib dr-xr-xr-x 9 root root 2048 Aug 5 2000 mirror dr-xr-xr-x 2 root root 2048 Jun 15 00:10 mnt dr-xr-xr-x 17 root root 0 Aug 30 2000 proc dr-xr-xr-x 2 root root 2048 Jun 15 00:10 root dr-xr-xr-x 2 root root 8192 Aug 3 23:04 sbin dr-xr-xr-x 4 root root 2048 Jul 31 16:27 share drwxrwxrwx 3 root root 1024 Aug 4 01:33 tmp dr-xr-xr-x 15 root root 2048 Aug 3 23:04 usr dr-xr-xr-x 10 root root 2048 Aug 4 2000 var # cat /proc/cpuinfo processor : 0 cpu family : PA-RISC cpu : PA8000 cpu MHz : 160.000000 model : model name : UL 2w U160 512K/512K (871/D270,D370) hversion : 0x00005a30 sversion : 0x00000491 I-cache : 512 KB D-cache : 512 KB (WB) ITLB entries : 96 DTLB entries : 96 - shared with ITLB BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) BTLB fix-entr. : 0 instruction, 0 data (16 combined) BTLB var-entr. : 0 instruction, 0 data (0 combined) bogomips : 292.45 # shutdown now -h Why? why not? shutdown: halted by ghost: why not? Couldn't umount pipe: on none: No such file or directory Unmounting any remaining filesystems... shutdown: Cannot open /etc/mtab. Now you can turnSystem halted. off the power..gsc.c:gsc_mach cmd 2 .