From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id MAA28082 for ; Fri, 8 Sep 2000 12:54:26 -0600 Received: from mindspring.com (localhost.localdomain [127.0.0.1]) by tmbk2.gtri.gatech.edu (Postfix) with ESMTP id 9B6764988C for ; Fri, 8 Sep 2000 14:54:38 -0400 (EDT) Sender: bob@tmbk2.gtri.gatech.edu Message-ID: <39B935EE.EEEC23BE@mindspring.com> Date: Fri, 08 Sep 2000 18:54:38 +0000 From: Robert Stickel MIME-Version: 1.0 To: parisc-linux@thepuffingroup.com Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] Bug report List-ID: Hello, The good news: We are really excited about the Puffin project. The bad news: We tried to boot an Apollo 9000/710 on your PA/Linux Developer's Release CD, Version 0.1 - Snapshot 2000/08/04 and never quite got to a root prompt (see transcript below). Should this be possible or are we missing something? Thanks for any advice, rstickel@mindspring.com sts@minitower.gtri.gatech.edu Transcript of attempt to boot Apollo 9000/710 on Puffin CD. At the request_irq(259, c01ec76c, 0x0, asp, c3fcd080) line the systems hangs. (c) Copyright. Hewlett-Packard Company. 1991. All rights reserved. PDC ROM rev. 2.0 IODC ROM rev. 2.0 64 MB of memory configured and tested. Selecting a system to boot. To stop selection process, press and hold the ESCAPE key. Selection process stopped. Searching for Potential Boot Devices. To terminate search, press and hold the ESCAPE key. Device Selection Device Path Device Type ---------------------------------------------------------------------------- P0 scsi.6.0 MATSHITACD-ROM CR-8005A P1 scsi.5.0 IOMEGA ZIP 100 P2 scsi.4.0 iomega jaz 1GB P3 scsi.3.0 SEAGATE ST11200N SUN1.05 P4 scsi.2.0 SEAGATE ST31230N P5 scsi.1.0 IBM 0662 b) Boot from specified device s) Search for bootable devices a) Enter Boot Administration mode x) Exit and continue boot sequence ?) Help Select from menu: a BOOT_ADMIN> info ----------------------------- Hardware Configuration ------------------------ Machine model: 9000/710 Processor Frequency = 50000000 Hz I/O Subsystem Frequency = 25000000 Hz LAN Jumper Status: Internal ThinLAN Port selected Processor Revision = 3 System Controller Revision = 0 Floating Point Coprocessor Revision = 3 Hardware Version 12288 (0x00003000) Software Version 1153 (0x00000481) BOOT_ADMIN> boot alt Trying scsi.6.0 Boot path initialized. Attempting to load IPL. Hard booted. palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000 0/vmlinux 2349352 bytes @ 0x6e8800 0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0' Kernel: partition 0 file /vmlinux ELF32 executable Entry 00100000 first 00100000 n 4 Segment 0 load 00100000 size 1511580 mediaptr 0x1000 Segment 1 load 00272000 size 132368 mediaptr 0x173000 Segment 2 load 00294000 size 86880 mediaptr 0x194000 Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000 branching to kernel entry point 0x00100000 pdc_cons registered ! The Kernel has started... Free memory starts at: 0xc02dc000 PALO command line: 'TERM=linux HOME=/ root=/dev/scd0' PALO initrd 0-0 FP CCR was 0x0, will be set to 0xc0 model 00003000 00000481 00000000 00000000 78243572 00000000 00000004 0000000d 00000000 vers 00000003 CPUID vers 0 rev 0 CPU(s): 1 x PA7000 at 50.000000 MHz Searching for devices in PDC firmware... an older box... Found devices: 1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0, 0x77, 0x0, 0x0 2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0, 0x0 3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71, 0x0, 0x0 4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0, 0x72, 0x0, 0x0 5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0, 0x0 6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75, 0x0, 0x0 7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75, 0x0, 0x0 8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0, 0x74, 0x0, 0x0 9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0, 0x0 10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0, 0x81 11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0 That's a total of 11 devices. Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707 (experimental)) #24 Fri Aug 4 18:27:58 MDT 2000 initrd: 00000000-00000000 pagetable_init On node 0 totalpages: 16384 zone(0): 8192 pages. zone(1): 8192 pages. zone(2): 0 pages. trap_init Calibrating delay loop... 46.08 BogoMIPS Memory: 61380k available Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) kmem_create: Poisoning requested, but con given - bdev_cache Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) kmem_create: Poisoning requested, but con given - inode_cache POSIX conformance testing by UNIFIX ASP version 1 at 0xf0800000 found. request_irq(259, c01ec76c, 0x0, asp, c3fcd080)