From: Dan Malek <dan@mvista.com>
To: paulus@linuxcare.com.au
Cc: Benjamin Herrenschmidt <bh40@calva.net>,
Linux/PPC Development <linuxppc-dev@lists.linuxppc.org>
Subject: Re: __ioremap_at() in 2.4.0-test9-pre2
Date: Fri, 29 Sep 2000 00:22:50 -0400 [thread overview]
Message-ID: <39D4191A.5C8DE9F0@mvista.com> (raw)
In-Reply-To: 14803.60860.762026.661989@argo.linuxcare.com.au
Paul Mackerras wrote:
> I don't see why it matters on powermacs which is the primary bridge
> though, since we fortunately don't have any legacy ISA devices.
> Hum... except for cards in the PC-card slot... So we need to make
> sure that the bus with the cardbus controller is behind the "primary"
> bridge.
I thought this whole discussion was started because someone wanted
a 16550-like serial card on the PCI bus....
Isn't the cardbus only on the PowerBook/iBook, which only have one
PCI bus? Of course, this will change with the new G4 PowerBooks....
> The issue here is that the pcmcia/cardbus stuff will assign a range
> of I/O addresses to a pcmcia card (starting at say I/O port n) and
> then expect that inb(n) will access the card.
That should work, and most of the modules have 'ioport=' configuration
option in any case....
-- Dan
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-09-29 4:22 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-09-17 18:59 __ioremap_at() in 2.4.0-test9-pre2 Geert Uytterhoeven
2000-09-19 3:59 ` Paul Mackerras
2000-09-19 5:56 ` Michel Lanners
2000-09-19 14:28 ` Dan Malek
2000-09-19 18:31 ` Roman Zippel
2000-09-19 20:09 ` Dan Malek
2000-09-19 23:42 ` Roman Zippel
2000-09-20 0:10 ` Dan Malek
2000-09-20 17:18 ` Roman Zippel
2000-09-20 18:11 ` Dan Malek
2000-09-20 20:22 ` Roman Zippel
2000-09-20 20:41 ` David Edelsohn
2000-09-21 2:16 ` Dan Malek
2000-09-21 2:26 ` David Edelsohn
2000-09-21 2:40 ` Dan Malek
2000-09-21 3:53 ` David Edelsohn
2000-09-19 22:06 ` Matt Porter
2000-09-19 22:58 ` Paul Mackerras
2000-09-20 6:12 ` Matt Porter
2000-09-20 12:15 ` Geert Uytterhoeven
2000-09-20 23:08 ` Paul Mackerras
2000-09-21 20:12 ` Matt Porter
2000-09-20 8:34 ` Roman Zippel
2000-09-20 22:54 ` Paul Mackerras
2000-09-20 15:56 ` Dan Malek
2000-09-20 23:22 ` Paul Mackerras
2000-09-21 2:13 ` Dan Malek
2000-09-21 2:35 ` Paul Mackerras
2000-09-21 3:57 ` Dan Malek
2000-09-21 5:06 ` Paul Mackerras
2000-09-21 6:51 ` Dan Malek
2000-09-21 14:03 ` Geert Uytterhoeven
2000-09-21 22:40 ` Benjamin Herrenschmidt
2000-09-22 3:53 ` Dan Malek
2000-09-22 11:58 ` Geert Uytterhoeven
2000-09-22 18:46 ` Dan Malek
2000-09-22 20:06 ` Frank Rowand
2000-09-23 21:38 ` Matt Porter
2000-09-21 20:22 ` Matt Porter
2000-09-22 3:49 ` Paul Mackerras
2000-09-22 4:16 ` Dan Malek
2000-09-23 12:34 ` Geert Uytterhoeven
2000-09-27 10:37 ` Benjamin Herrenschmidt
2000-09-28 9:59 ` Geert Uytterhoeven
2000-09-28 19:19 ` Benjamin Herrenschmidt
2000-09-28 23:33 ` Benjamin Herrenschmidt
2000-09-29 5:08 ` Dan Malek
2000-09-29 11:37 ` Geert Uytterhoeven
2000-09-29 17:12 ` Kostas Gewrgiou
2000-09-29 17:18 ` Benjamin Herrenschmidt
2000-09-29 21:35 ` Michel Lanners
2000-09-30 0:11 ` Matt Porter
2000-09-29 0:22 ` Paul Mackerras
2000-09-29 0:40 ` Benjamin Herrenschmidt
2000-09-29 1:17 ` Paul Mackerras
2000-09-29 4:22 ` Dan Malek [this message]
2000-09-29 4:29 ` Dan Malek
2000-09-29 4:36 ` Paul Mackerras
2000-09-29 5:40 ` Dan Malek
2000-09-29 19:07 ` Frank Rowand
2000-09-30 1:39 ` Paul Mackerras
2000-09-30 22:50 ` Frank Rowand
2000-10-01 1:09 ` Dan Malek
2000-10-01 8:16 ` Paul Mackerras
2000-10-01 21:30 ` Dan Malek
2000-10-01 22:50 ` Paul Mackerras
2000-10-02 9:04 ` Dan Malek
2000-09-28 23:24 ` Frank Rowand
2000-09-21 13:44 ` Geert Uytterhoeven
2000-09-21 22:41 ` Benjamin Herrenschmidt
2000-09-22 21:59 ` Michel Lanners
2000-09-20 12:08 ` Geert Uytterhoeven
2000-09-20 16:31 ` Matt Porter
-- strict thread matches above, loose matches on Subject: below --
2000-09-21 7:30 Iain Sandoe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39D4191A.5C8DE9F0@mvista.com \
--to=dan@mvista.com \
--cc=bh40@calva.net \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=paulus@linuxcare.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.