From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <39D4FB80.37D696AA@mvista.com>
Date: Fri, 29 Sep 2000 16:28:48 -0400
From: Dan Malek <dan@mvista.com>
MIME-Version: 1.0
To: Ruedi.Hofer@ascom.ch
CC: linuxppc-embedded@lists.linuxppc.org, kernel@linux01.hasler.ascom.ch
Subject: Re: Antwort: Re: VxWorks bootloader & PowerQUICC II, Booting the
 kernel,2nd
References: <0G1N00B67LWVUM@pmdf-it.hasler.ascom.ch>
Content-Type: text/plain; charset=us-ascii
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Ruedi.Hofer@ascom.ch wrote:

> I just noticed that your link points to a 8xx (PowerQuicc) directory!

It's all the same....just a place to put bits....

> Does vxhack work for an 8260 PowerQuicc II kernel or do you
> suggest another solution? I need to boot Linux on a SBC8260
> evaluation board...

I thought the one I put there was modified for the 8260, but would
also work on the 8xx.  I'll check it out.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/