From: Les Hazelton <seawolf@attglobal.net>
To: Mauelshagen@Sistina.com
Cc: linux-lvm@msede.com
Subject: Re: [linux-lvm] need help to recover my system
Date: Sun, 01 Oct 2000 11:42:59 -0400 [thread overview]
Message-ID: <39D75B83.1555FED5@attglobal.net> (raw)
In-Reply-To: 20001001100151.A3571@srv.t-online.de
My kernel had LVM support compiled in, not as a module. I had created an initrd but
may have not done that correctly. I think the real problem was that the grub loader
was installed on the root "/" partition and not the "/boot" partition. I had booted
the new configuration several times without problem until I deleted the original "/"
partition. That's when I realized where the grub loader was installed.
When I use linux fdisk I see the entry for hdc5 as Linux LVM (85) and if I do "cat
/proc/partitions" there is an entry for /dev/hdc5.
If, while running my test system with kernel 2.4.0, I run the pvcreate command for
/dev/hdc5 will that destroy the existing PV, VG, LVM content that is currently their?
"Heinz J. Mauelshagen" wrote:
> On Sat, Sep 30, 2000 at 11:02:36PM -0400, Les Hazelton wrote:
> > I had a Mandrake 7.1 system running the 2.2.17 kernel with LVM and
> > reiserfs patches applied. I have a 15Gb partition on /dev/hdc5 which
> > was one large PV. It supports one VG which has the logical volumes for
> > /usr, /home, /var, etc... Everything except /boot and / which were on
> > the hda drive as plain ext2 file systems.
> >
> > I decided to move the root partition "/" to a logical volume on hdc5 and
> > all was going well until I deleted it from the ext2 system on hda6.
>
> How did you do that?
> Did you create an inital ram disk to load the lvm driver and activate
> the volume group?
> Otherwise you can't access your volume group(s) anyway from the /boot
> booted kernel.
>
> > So
> > now I have a perfectly good Linux system contained on the hdc5 PV which
> > I can't access.
> >
> > I have test system (Mandrake 7.2-b) on the hda drive. It has the
> > 2.4.0-0.22 kernel distributed my Mandrake and I have been attempting to
> > recover using that system. The problem is I keep getting these errors:
> >
> > ------------------------------------------------------------------------------
> > pvscan -- reading all physical volumes (this may take a while...)
> > pvscan -- ERROR "pv_read_all_pv(): lvm_dir_cache" reading physical
> > volumes
>
> This error means, that no (compatible) entries could be found either
> in /proc/partitions or, if /proc/partitions doesn't exist, in /dev.
>
> Please check that these sources are valid on your Mandrake 7.2-b test system
> and retry.
>
> >
> > [root@farpt1 /root]# vgscan -v
> > vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
> > vgscan -- reading all physical volumes (this may take a while...)
> > vgscan -- no volume groups found
> > -------------------------------------------------------------------------------
> >
> > I was going to try a pvcreate for /dev/hdc5 but thought it would wipe
> > the partition clean and I don't want to start over if there is *any*
> > hope of recovering it.
> >
> > Please, if anyone knows a way to recover this volume, I would be
> > extremely grateful for the help.
> >
> > Les Hazelton
>
> --
>
> Regards,
> Heinz -- The LVM guy --
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> Heinz Mauelshagen Sistina Software Inc.
> Senior Consultant/Developer Bartningstr. 12
> 64289 Darmstadt
> Germany
> Mauelshagen@Sistina.com +49 6151 7103 86
> FAX 7103 96
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Les Hazelton
next prev parent reply other threads:[~2000-10-01 15:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-01 3:02 [linux-lvm] need help to recover my system Les Hazelton
2000-10-01 10:01 ` Heinz J. Mauelshagen
2000-10-01 15:42 ` Les Hazelton [this message]
2000-10-01 18:10 ` Heinz J. Mauelshagen
2000-10-01 22:54 ` Les Hazelton
2000-10-02 4:49 ` Andreas Dilger
2000-10-02 6:33 ` Les Hazelton
2000-10-02 10:26 ` Heinz J. Mauelshagen
2000-10-02 9:10 ` Les Hazelton
2000-10-02 14:58 ` Les Hazelton
2000-10-02 10:20 ` Heinz J. Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39D75B83.1555FED5@attglobal.net \
--to=seawolf@attglobal.net \
--cc=Mauelshagen@Sistina.com \
--cc=linux-lvm@msede.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.