From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id BAA08751 for ; Wed, 18 Oct 2000 01:02:07 -0600 Received: from videotron.ca ([207.253.109.87]) by VL-MS-MR003.sc1.videotron.ca (Netscape Messaging Server 4.15) with ESMTP id G2M69Q02.4R8 for ; Wed, 18 Oct 2000 03:03:26 -0400 Sender: fleet@mailserv2.iuinc.com Message-ID: <39ED4B3B.85348ED2@videotron.ca> Date: Wed, 18 Oct 2000 03:03:23 -0400 From: James Waterhouse MIME-Version: 1.0 To: "parisc-linux@thepuffingroup.com" Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] booting on 712/60 List-ID: Hello, I just compiled a ramdisk using mondays cvs src for everything. I'm using the graphics console ramdisk file off the puffin.external.hp.com (ramdisk20000530-sticon.tgz) to make the ramdisk. Now when I got to boot it boots up until the point where the kernel says... Sending BOOTP request.... OK IP-Config: Got BOOTP answer.. bla bla Switching from PDC console And then I get nothing. So what is happening when we switch from the PDC console? Is the output going to the serial port, or am I crashing because my graphics hardware is not supported, or am I crashing for some other reason? Thanks, James -- Can you discern the signs of the times? || www.danielrevelation.com Do you see the storm fast approaching? || www.sundaylaw.com Is your future built on "The Rock"? || www.bibleinfo.com/sc/toc_sc.html