From: Jim Buttafuoco <jim@buttafuoco.org>
To: PARISC-LINUX Mailing List <parisc-linux@thepuffingroup.com>
Subject: [parisc-linux] Boot problems with CD image
Date: Mon, 23 Oct 2000 20:07:53 -0400 [thread overview]
Message-ID: <39F4D2D9.3646D1@buttafuoco.org> (raw)
Hi,
I downloaded the CD image from the FTP site in order to boot my 710
system. It failed, attached is the output from the serial port.
Any ideas????
Thanks
Jim
.
Booting from: scsi.0.0 PLEXTOR CD-ROM PX-12TS
Hard booted.
palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000
0/vmlinux 2349352 bytes @ 0x6e8800
0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0'
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1511580 mediaptr 0x1000
Segment 1 load 00272000 size 132368 mediaptr 0x173000
Segment 2 load 00294000 size 86880 mediaptr 0x194000
Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000
branching to kernel entry point 0x00100000
pdc_cons registered !
The Kernel has started...
Free memory starts at: 0xc02dc000
PALO command line: 'TERM=linux HOME=/ root=/dev/scd0'
PALO initrd 0-0
FP CCR was 0x0, will be set to 0xc0
model 00003000 00000481 00000000 00000000 77ed7152 00000000 00000004
0000000d 00000000
vers 00000003
CPUID vers 0 rev 0
CPU(s): 1 x PA7000 at 50.000000 MHz
Searching for devices in PDC firmware... an older box...
Found devices:
1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0,
0x77, 0x0, 0x0
2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0,
0x0
3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71,
0x0, 0x0
4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0,
0x72, 0x0, 0x0
5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0,
0x0
6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75,
0x0, 0x0
7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75,
0x0, 0x0
8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0,
0x74, 0x0, 0x0
9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0,
0x0
10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0,
0x81
11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0
That's a total of 11 devices.
Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707
(experimental)) #24 Fri Aug 4 18:27:58 MDT 2000
initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 8192
zone(0): 4096 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
trap_init
error reading tod clock
Calibrating delay loop... 46.08 BogoMIPS
Memory: 29224k available
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
POSIX conformance testing by UNIFIX
ASP version 1 at 0xf0800000 found.
request_irq(259, c01ec76c, 0x0, asp, c1fe4080)
^^^^^
|--------This is where it stops...
next reply other threads:[~2000-10-24 0:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-24 0:07 Jim Buttafuoco [this message]
2000-10-24 15:12 ` [parisc-linux] Boot problems with CD image Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39F4D2D9.3646D1@buttafuoco.org \
--to=jim@buttafuoco.org \
--cc=parisc-linux@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.