From: Remi Turk <remi@a2zis.com>
To: Jeff Garzik <jgarzik@mandrakesoft.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: No IRQ known for interrupt pin A of device 00:0f.0
Date: Sat, 28 Oct 2000 21:29:37 +0200 [thread overview]
Message-ID: <39FB2921.992E6BE8@a2zis.com> (raw)
In-Reply-To: <39FB024B.220A025C@a2zis.com> <39FB0EAB.C87F816C@mandrakesoft.com>
Jeff Garzik wrote:
>
> Remi Turk wrote:
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 78
> > PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try
> > using pci=biosirq.
>
> test10-pre6 gives this warning?
>
> Can you post the output of dump_pirq, from the pcmcia_cs package? (if
> you don't have it already, http://pcmcia-cs.sourceforge.net/)
>
Here it is:
Interrupt routing table found at address 0xf0b40:
Version 1.0, size 0x00a0
Interrupt router is device 00:07.0
PCI exclusive interrupt mask: 0x0000 []
Compatible router: vendor 0x10b9 device 0x1533
Device 00:0c.0 (slot 1):
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0b.0 (slot 2):
INTA: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0a.0 (slot 3):
INTA: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:09.0 (slot 4): Multimedia audio controller
INTA: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0d.0 (slot 5):
INTA: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:02.0 (slot 0): USB Controller
INTA: link 0x59, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:01.0 (slot 0): PCI bridge
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:06.0 (slot 0):
INTA: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Interrupt router at 00:07.0: AcerLabs Aladdin M1533 PCI-to-ISA bridge
INT1 (link 1): irq 11
INT2 (link 2): unrouted
INT3 (link 3): irq 5
INT4 (link 4): irq 10
INT5 (link 5): unrouted
INT6 (link 6): unrouted
INT7 (link 7): unrouted
INT8 (link 8): unrouted
Serial IRQ: [disabled] [quiet] [frame=21] [pulse=12]
--
Linux 2.4.0-test10-pre6 #1 Sat Oct 28 14:15:54 CEST 2000
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-10-28 19:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-28 16:43 No IRQ known for interrupt pin A of device 00:0f.0 Remi Turk
2000-10-28 17:36 ` Jeff Garzik
2000-10-28 19:29 ` Remi Turk [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-08-26 5:35 Jeffrey Altman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39FB2921.992E6BE8@a2zis.com \
--to=remi@a2zis.com \
--cc=jgarzik@mandrakesoft.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.