From mboxrd@z Thu Jan 1 00:00:00 1970 From: GoatZilla Subject: Re: Manual PST settings for "unrecognized CPUs" Date: Sun, 22 Aug 2004 02:12:53 -0500 Sender: cpufreq-bounces@www.linux.org.uk Message-ID: <39e34848040822001251ddd0be@mail.gmail.com> References: <39e3484804081616133c2765ce@mail.gmail.com> <20040817062634.6C2404BE94@nathan.muc.de> <39e348480408171130537c34e6@mail.gmail.com> <20040819001654.32D0D4BE98@nathan.muc.de> Reply-To: GoatZilla Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_22_22629842.1093158773750" Return-path: In-Reply-To: <20040819001654.32D0D4BE98@nathan.muc.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@www.linux.org.uk To: cpufreq@www.linux.org.uk ------=_Part_22_22629842.1093158773750 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Disposition: inline OK, I just installed Linux on the machine and patched 2.6.8 successfully, but I'm getting a a "No such device" because the powernow_decode_bios routine never finds the "PSB Header". I have no idea what a PSB header even is. Do I need to fake the PSB header information as well? Or is there a simpler way around this? I also attached the dump of x86info. I'm not sure why it's telling me FID changes won't work; it's looking at some FIDC bit in an MSR... This wouldn't affect cpufreq would it? ------=_Part_22_22629842.1093158773750 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Linux version 2.6.8 (root@broccoli) (gcc version 3.3.4 (Debian 1:3.3.4-6sar= ge1)) #1 Sat Aug 21 19:37:58 CDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS) BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28656 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f6a20 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: root=3D/dev/hda2 ro=20 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 1347.875 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122532k/131008k available (1321k kernel code, 7932k reserved, 725k = data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok= . Calibrating delay loop... 2670.59 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 CPU: AMD Unknown CPU Typ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1347.0528 MHz. ..... host bus clock speed is 199.0633 MHz. checking if image is initramfs...it isn't (ungzip failed); looks like an in= itrd Freeing initrd memory: 4232k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=3D1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. spurious 8259A interrupt: IRQ7. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbef0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf20, dseg 0xf0000 PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4232 blocks [1 disk] into ram disk... |=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 204k freed NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 6Y250P0, ATA DISK drive hdb: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=3D30515/255/63, UDM= A(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 257028k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda2, internal journal Real Time Clock Driver v1.12 hdb: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 irda_init() NET: Registered protocol family 23 via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine II at 0xe800, 00:0a:e6:f0:62:73, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10 via82cxxx: Six channel audio available PCI: Setting latency timer of device 0000:00:11.5 to 64 ac97_codec: AC97 Audio codec, id: VIA97 (Unknown) via82cxxx: board #1 at 0xE000, IRQ 10 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 12 (level, low) -> IRQ 12 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: irq 12, pci mem c8889000 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected input: PC Speaker inserting floppy driver for 2.6.8 FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EC= P,DMA] Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 128M @ 0xd0000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=3D0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=3D0x5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=3D0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=3D0x5 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contro= ller uhci_hcd 0000:00:10.0: irq 11, io base 0000d000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contro= ller (#2) uhci_hcd 0000:00:10.1: irq 5, io base 0000d400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contro= ller (#3) uhci_hcd 0000:00:10.2: irq 10, io base 0000d800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. NET: Registered protocol family 17 NET: Registered protocol family 10 Disabled Privacy Extensions on device c02c8280(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present ACPI: Processor [CPU0] (supports C1 C2) powernow_k7: Ignoring new-style parameters in presence of obsolete ones powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: FSB: 99.842 MHz powernow: cpuid is (0x781) powernow: Trying ACPI perflib powernow: ACPI perflib can not be used in this platform powernow: ACPI and legacy methods failed powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.sht= ml ------=_Part_22_22629842.1093158773750 Content-Type: text/plain; name="x86info.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="x86info.txt" x86info v1.12b. Dave Jones 2001-2003 Feedback to . Found 1 CPU -------------------------------------------------------------------------- eax in: 0x00000000, eax =3D 00000001 ebx =3D 68747541 ecx =3D 444d4163 edx = =3D 69746e65 eax in: 0x00000001, eax =3D 00000681 ebx =3D 00000000 ecx =3D 00000000 edx = =3D 0383fbff eax in: 0x80000000, eax =3D 80000008 ebx =3D 68747541 ecx =3D 444d4163 edx = =3D 69746e65 eax in: 0x80000001, eax =3D 00000781 ebx =3D 00000000 ecx =3D 00000000 edx = =3D c1c3fbff eax in: 0x80000002, eax =3D 6e6b6e55 ebx =3D 206e776f ecx =3D 20555043 edx = =3D 00707954 eax in: 0x80000003, eax =3D 00000000 ebx =3D 00000000 ecx =3D 00000000 edx = =3D 00000000 eax in: 0x80000004, eax =3D 00000000 ebx =3D 00000000 ecx =3D 00000000 edx = =3D 00000000 eax in: 0x80000005, eax =3D 0408ff08 ebx =3D ff20ff10 ecx =3D 40020140 edx = =3D 40020140 eax in: 0x80000006, eax =3D 00000000 ebx =3D 41004100 ecx =3D 00408140 edx = =3D 00000000 eax in: 0x80000007, eax =3D 00000000 ebx =3D 00000000 ecx =3D 00000000 edx = =3D 00000007 eax in: 0x80000008, eax =3D 00002022 ebx =3D 00000000 ecx =3D 00000000 edx = =3D 00000000 Family: 6 Model: 8 Stepping: 1 CPU Model : Mobile Duron (Thoroughbred)[B0] Feature flags: =09Onboard FPU =09Virtual Mode Extensions =09Debugging Extensions =09Page Size Extensions =09Time Stamp Counter =09Model-Specific Registers =09Physical Address Extensions =09Machine Check Architecture =09CMPXCHG8 instruction =09Onboard APIC =09SYSENTER/SYSEXIT =09Memory Type Range Registers =09Page Global Enable =09Machine Check Architecture =09CMOV instruction =09Page Attribute Table =0936-bit PSEs =09MMX support =09FXSAVE and FXRESTORE instructions =09SSE support Extended feature flags: syscall mmxext 3dnowext 3dnow MSR: 0x0000002a=3D0x00000000 : 00000000 00000000 00000000 00000000 MSR: 0xc0000080=3D0x00000000 : 00000000 00000000 00000000 00000000 MSR: 0xc0010010=3D0x00140604 : 00000000 00010100 00000110 00000100 MSR: 0xc0010015=3D0x050b1008 : 00000101 00001011 00010000 00001000 MSR: 0xc001001b=3D0x20031223 : 00100000 00000011 00010010 00100011 Number of reporting banks : 4 MCG_CTL: Data cache check disabled Instruction cache check disabled Bus unit check disabled Load/Store unit check disabled 31 23 15 7=20 Bank: 0 (0x400) MC0CTL: 00000000 00000000 00000000 00000000 MC0STATUS: 00000000 00000000 00000000 00000000 MC0ADDR: 00000000 00000000 00000000 00000000 MC0MISC: 00000000 00000000 00000000 00000000 Bank: 1 (0x404) MC1CTL: 00000000 00000000 00000000 00000000 MC1STATUS: 00000000 00000000 00101010 00111010 MC1ADDR: 00000000 00000000 00101010 00111010 MC1MISC: 00000000 00000000 00000000 00000000 Bank: 2 (0x408) MC2CTL: 00000000 00000000 00000000 00000000 MC2STATUS: 00000000 00000010 00000001 00000010 MC2ADDR: 10111101 00000000 00000000 00001111 MC2MISC: 10111101 00000000 00000000 00001111 Bank: 3 (0x40c) MC3CTL: 00000000 00000000 00000000 00000000 MC3STATUS: 00000000 00000000 00001000 01000011 MC3ADDR: 11111111 11111111 11110111 11111111 MC3MISC: 00000000 00000000 00000000 00000000 Instruction TLB: Fully associative. 16 entries. Data TLB: Fully associative. 32 entries. L1 Data cache: =09Size: 64Kb=092-way associative.=20 =09lines per tag=3D1=09line size=3D64 bytes. L1 Instruction cache: =09Size: 64Kb=092-way associative.=20 =09lines per tag=3D1=09line size=3D64 bytes. L2 (on CPU) cache: =09Size: 64Kb=098-way associative.=20 =09lines per tag=3D1=09line size=3D64 bytes. PowerNOW! Technology information Available features: =09Temperature sensing diode present. =09Bus divisor control =09Voltage ID control MSR: 0xc0010041=3D0x0000000000000000 : 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 MSR: 0xc0010042=3D0x0000000000111515 : 00000000 00000000 00000000 00000000 00000000 00010001 00010101 00010101 FID changes won't happen VID changes won't happen Voltage ID codes: Maximum=3D2.000V Startup=3D2.000V Currently=3D2.000V Frequency ID codes: Maximum=3D19.0x Startup=3D13.5x Currently=3D13.5x Decoding BIOS PST tables (maxfid=3D11, startvid=3D0) Connector type: Socket A (462 Pin PGA) MTRR registers: MTRRcap (0xfe): 0x0000000000000508 MTRRphysBase0 (0x200): 0x0000000000000006 MTRRphysMask0 (0x201): 0x0000000ff8000800 MTRRphysBase1 (0x202): 0x00000000d0000001 MTRRphysMask1 (0x203): 0x0000000ff8000800 MTRRphysBase2 (0x204): 0x00000000d0000001 MTRRphysMask2 (0x205): 0x0000000ff8000800 MTRRphysBase3 (0x206): 0x0000000000000000 MTRRphysMask3 (0x207): 0x0000000000000000 MTRRphysBase4 (0x208): 0x0000000000000000 MTRRphysMask4 (0x209): 0x0000000000000000 MTRRphysBase5 (0x20a): 0x0000000000000000 MTRRphysMask5 (0x20b): 0x0000000000000000 MTRRphysBase6 (0x20c): 0x0000000000000000 MTRRphysMask6 (0x20d): 0x0000000000000000 MTRRphysBase7 (0x20e): 0x0000000000000000 MTRRphysMask7 (0x20f): 0x0000000000000000 MTRRfix64K_00000 (0x250): 0x0606060606060606 MTRRfix16K_80000 (0x258): 0x0606060606060606 MTRRfix16K_A0000 (0x259): 0x0000000000000000 MTRRfix4K_C8000 (0x269): 0x0000000000000000 MTRRfix4K_D0000 0x26a: 0x0000000000000000 MTRRfix4K_D8000 0x26b: 0x0000000000000000 MTRRfix4K_E0000 0x26c: 0x0000000000000000 MTRRfix4K_E8000 0x26d: 0x0000000000000000 MTRRfix4K_F0000 0x26e: 0x0000000000000000 MTRRfix4K_F8000 0x26f: 0x0000000000000000 MTRRdefType (0x2ff): 0x0000000000000c00 1.3Ghz processor (estimate). ------=_Part_22_22629842.1093158773750 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Cpufreq mailing list Cpufreq@www.linux.org.uk http://www.linux.org.uk/mailman/listinfo/cpufreq ------=_Part_22_22629842.1093158773750--