From: "Jean-Francois Patenaude" <jf.patenaude@bell.ca>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: kernel panic while copying files
Date: Wed, 01 Nov 2000 11:08:45 -0500 [thread overview]
Message-ID: <3A00400D.4981E278@bell.ca> (raw)
[1.] One line summary of the problem:
kernel panic while copying files
[2.] Full description of the problem/report:
When I copy a 450 MB file from one partition (/usr) to another (/tmp) I
get a kernel panic. It happens everytime I copy that file. The amount
of data copied before the kernel panic is not always the same. These
two partitions use ext2fs.
[3.] Keywords (i.e., modules, networking, kernel):
xx
[4.] Kernel version (from /proc/version):
The problem happens with kernel 2.4.0-test{1,5,8,9}
and it doesn't happen with kernel 2.2.{14,17}
I would like to use newer kernels since I want to add XFS support (SGI's
filesystem). Although I must specify that my problems are happening
even with kernel that have not had the XFS patch applied.
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
xx
[6.] A small shell script or example program which triggers the
problem (if possible)
cp /usr/blah1 /tmp
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
THIS IS THE OUTPUT WHEN I BOOT THE "WORKING KERNEL" (2.2.17)
[root@csrc228 linux]# sh scripts/ver_linux
-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux csrc228 2.2.17 #1 Wed Nov 1 10:03:58 EST 2000 i686 unknown
Kernel modules 2.3.10-pre1
Gnu C egcs-2.91.66
Binutils 2.9.5.0.22
Linux C Library 2.1.3
Dynamic linker ldd (GNU libc) 2.1.3
Procps 2.0.6
Mount 2.10f
Net-tools 1.54
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded
[root@csrc228 linux]#
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 499.889
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr xmm
bogomips : 996.15
[7.3.] Module information (from /proc/modules):
no modules loaded
[7.4.] Loaded driver and hardware information (/proc/ioports,
/proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
2000-207f : sym53c8xx
2400-247f : sym53c8xx
4000-401f : Intel Speedo3 Ethernet
4020-403f : Intel Speedo3 Ethernet
[7.5.] PCI information ('lspci -vvv' as root)
00:0b.0 PCI Hot-plug controller: Compaq Computer Corporation: Unknown
device a0f7 (rev 04)
Subsystem: Compaq Computer Corporation: Unknown device a2f8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at c6af0000 (32-bit, non-prefetchable)
00:0c.0 System peripheral: Compaq Computer Corporation: Unknown device
a0f0
Subsystem: Compaq Computer Corporation: Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1800
Region 1: Memory at c6ae0000 (32-bit, non-prefetchable)
00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR)
53c875 (rev 14)
Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 17 min, 64 max, 255 set, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 2000
Region 1: Memory at c6ad0000 (32-bit, non-prefetchable)
Region 2: Memory at c6ac0000 (32-bit, non-prefetchable)
00:0d.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR)
53c875 (rev 14)
Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 17 min, 64 max, 255 set, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400
Region 1: Memory at c6ab0000 (32-bit, non-prefetchable)
Region 2: Memory at c6aa0000 (32-bit, non-prefetchable)
00:0e.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 4756
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 64 set, cache line size 08
Region 0: Memory at c5000000 (32-bit, prefetchable)
Region 1: I/O ports at 2800
Region 2: Memory at c6a90000 (32-bit, non-prefetchable)
Capabilities: [5c] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:0f.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at 2c00
00:0f.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin D routed to IRQ 0
Region 4: I/O ports at 2c20
00:0f.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation 450NX - 82451NX Memory & I/O
Controller (rev 03)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:12.0 Host bridge: Intel Corporation 450NX - 82454NX PCI Expander
Bridge (rev 04)
Subsystem: Intel Corporation: Unknown device 84cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0 set, cache line size 08
00:14.0 Host bridge: Intel Corporation 450NX - 82454NX PCI Expander
Bridge (rev 04)
Subsystem: Intel Corporation: Unknown device 84cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0 set, cache line size 08
04:01.0 PCI bridge: IBM IBM27-82351 (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 set, cache line size 08
Bus: primary=04, secondary=05, subordinate=05, sec-latency=248
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c6d00000-c6dfffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
04:02.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Bus: primary=04, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c6e00000-c6ffffff
Prefetchable memory behind bridge:
00000000c6b00000-00000000c6b00000
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0b.0 PCI Hot-plug controller: Compaq Computer Corporation: Unknown
device a0f7 (rev 04)
Subsystem: Compaq Computer Corporation: Unknown device a2f8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at c6cf0000 (32-bit, non-prefetchable)
05:00.0 Unknown mass storage controller: Compaq Computer Corporation
Smart-2/P RAID Controller (rev 04)
Subsystem: Compaq Computer Corporation Smart Array Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3000
Region 1: Memory at c6df0000 (32-bit, non-prefetchable)
06:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 05)
Subsystem: Compaq Computer Corporation NC3131
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: Memory at c6bf0000 (32-bit, prefetchable)
Region 1: I/O ports at 4000
Region 2: Memory at c6f00000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
06:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 05)
Subsystem: Compaq Computer Corporation NC3131
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: Memory at c6be0000 (32-bit, prefetchable)
Region 1: I/O ports at 4020
Region 2: Memory at c6e00000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: QUANTUM Model: DLT8000 Rev: 0119
Type: Sequential-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
- The machine is a Compaq Proliant which has a RAID array (SMART2).
[root@csrc228 /proc]# free
total used free shared buffers
cached
Mem: 1296208 154624 1141584 8732 124276
6228
-/+ buffers/cache: 24120 1272088
Swap: 526312 0 526312
[root@csrc228 /proc]#
[X.] Other notes, patches, fixes, workarounds:
--
/\/\/\/\/\/\/\/
Jean-Francois Patenaude
MGR EXPERT. CTRE CLIENTS SERV. / DIR. CTRE EXP. SERVICE CLIENTS
700 DE LA GAUCHETIERE OUEST RC-MEZ MONTREAL (QUEBEC) H3B 4L1
Tel: (514) 870-3190 Fax: (514) 391-8660 Pag: (514) 330-4479
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ jf.patenaude@bell.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-11-01 16:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-01 16:08 Jean-Francois Patenaude [this message]
2000-11-01 20:16 ` PROBLEM: kernel panic while copying files Tigran Aivazian
2000-11-01 20:22 ` Jean-Francois Patenaude
2000-11-06 21:20 ` PROBLEM: kernel panic while copying files (with the OOPS included) Jean-Francois Patenaude
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A00400D.4981E278@bell.ca \
--to=jf.patenaude@bell.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.