From: David Ford <david@linux.com>
To: LKML <linux-kernel@vger.kernel.org>
Subject: speaking of USB...(bug/hub.c)
Date: Sat, 18 Nov 2000 02:09:26 -0800 [thread overview]
Message-ID: <3A165556.FFA4FCB6@linux.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1997 bytes --]
Here's another one for the books. In the recent test11 series, timing
appears to be partially broken for dev addr assignments. If I'm lucky a
new usb device will answer back and get all the numbers set up
properly. Regularly however a new device gets plugged in and I get
several of the below without the success at the end. I usually need to
reboot to get my USB stuff alive again. The below is test7.
# dmesg
hub.c: USB new device connect on bus1/1, assigned device number 6
usb-uhci.c: interrupt, status 2, frame# 121
usb.c: USB device not accepting new address=6 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 7
# lspci
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at ef80 [size=32]
# cat devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0707 ProdID=0200 Rev= 1.01
S: Manufacturer=SMC, Inc
S: Product=EZ USB/Ethernet Converter
S: SerialNumber=0001
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=160mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=pegasus
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=128ms
-d
[-- Attachment #2: Card for David Ford --]
[-- Type: text/x-vcard, Size: 176 bytes --]
begin:vcard
n:Ford;David
x-mozilla-html:TRUE
adr:;;;;;;
version:2.1
email;internet:david@kalifornia.com
title:Blue Labs Developer
x-mozilla-cpt:;14688
fn:David Ford
end:vcard
next reply other threads:[~2000-11-18 10:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-18 10:09 David Ford [this message]
2000-11-18 20:40 ` speaking of USB...(bug/hub.c) Johannes Erdfelt
2000-11-19 5:24 ` David Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A165556.FFA4FCB6@linux.com \
--to=david@linux.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.