From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A23F07A.FF2F643@mvista.com> Date: Tue, 28 Nov 2000 09:50:50 -0800 From: Matthew Locke MIME-Version: 1.0 To: Nguyen Xuan Hoang CC: support@mvista.com, linuxppc-embedded@lists.linuxppc.org Subject: Re: PCMCIA Card Service References: <005201c059b0$2cdef7e0$ef0fa8c0@hoangmobile> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Nguyen Xuan Hoang wrote: > > Hi, > > I'm trying to get the PCMCIA CardService running on an mpc823 board > (RPX Lite). I pick up the code from Jo-Ellen Mathews of AbsoluteValue > Systems,and I can do something like remap memory, read data from IO > port...But end up with IRQ probe fail (I start with PCMCIA Flash Card). I > did an investigating and find out the reason, that is PCMCIA card service > already occupy the PCMCIA interrupt and I can not use request_8xxirq to > register another handler . > > I am thinking that I may have to rewrite request_8xxirq and pcmcia interrupt > handler to solve this case. Is there any better solution? Have any one have > done it? I am very appreciated for any help. yeah, I have done it. use my patches on ftp://ftp.mvista.com/pub/Area51/ppc_8xx. I still have not done a README, but if you have a MV support contract just contact support and they will help you out. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/