From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A242BE5.C34D48FC@mvista.com> Date: Tue, 28 Nov 2000 17:04:21 -0500 From: Dan Malek MIME-Version: 1.0 To: Brian Ford CC: linuxppc-embedded@lists.linuxppc.org Subject: Re: EST SBC8260 and Canary CTX-1170 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Brian Ford wrote: > So does this mean that a "complete" implementation would have a > "command/status MII interface" or that a "complete" implementation does > not need one? The complete implementation should have a real command/status MII interface. > Can you help point me to where I need to write code that would initialize > the FCC to do full duplex, I just checked in the newer driver that will properly do this on the EST board with the National PHY in the CTX-1170 gizmo. If for some reason this doesn't work, just modify mii_discover_phy_poll() to set 'phy_duplex' to '1'. I checked this into linuxppc_2_5 BitKeeper on FSM Labs. My 2.3/2.4 kernel is broken and I need to clone a new tree before I can make changes. That will take a little while...... -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/