From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3A7F6413.A80D1803@twisted.net> Date: Mon, 05 Feb 2001 21:40:19 -0500 From: Michael McLinn MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [linux-lvm] 0.9.1 vgscan doesn't detect upgraded vg's Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-lvm@sistina.com Hello, I was running some large vg's with 0.8final, and upgraded to 0.9.1_beta3 w/ kernel 2.4.1-ac2. After the upgrade, vgscan does not find any volume groups. Reverting to prior tools + kernel does not work as the on disk vg structures have been altered (presumably upgraded to the v2 format). I have no suitably recent vgcfg backups, so restoring is not an option. Thus, I have been digging in vgscan to see what is going wrong. My question is this... I look at the output of pvdata -U on a physical volume. I see 3 UUID slots, which matches the number of pv's in the vg. However, on the first pv in the vg, only the first one is filled. On the second pv in the vg, the first two are filled. On the third pv of the vg, all three are filled. Within pv_read_all_pv_of_vg.c, there is a call to pv_read_uuidlist(), this routine is scanning the first pv, and thus only returns one uuid. Later the result is only the first pv is returned from pv_read_all_pv_of_vg(). My theory is each pv is supposed to have the the UUID's of itself, and all other pv's in it's vg within it's UUID datastructure. Is this so? If this is the case, it seems it would be possible to write the correct UUID's to the datastructure on disk, and potentially improve (maybe even fix) my situation. Any advice would be welcome. A lot of important data is riding on solving this problem. One more note that might be of interest, these volume groups were created with a much earlier version of lvm, 0.6 or 0.7 I believe. Thank you. -Michael McLinn