From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3AA82575.D6C1CAF2@mvista.com> Date: Thu, 08 Mar 2001 19:36:05 -0500 From: Dan Malek MIME-Version: 1.0 To: Oliver Brown Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: EST SBC8260 and Canary CTX-1170 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Oliver Brown wrote: > I can't generate any traffic on the fast ethernet port. The CTX-1170 worked at one time on the EST board. Unfortunately, I had to make little changes for just about every different 8260 board I have seen. Further, my EST boards have all failed in some way or another so I can't even test this anymore. Even when it "worked", I had trouble with some 10/100 switches. > Ppcboot works fine on this setup, so I know that the hardware is > working. Is this driver available from sourceforge, or is it something you have locally? I would like to look at it and I may see some differences. Most of the changes surround the MDIO interface and the software "clocking" of the bits on those lines. The PHYs seem sensitive to timing I just can't get right with the software. I was able to get one, or a small subset, working at the same time, but not all of them at once. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/