From: Pascal Bonfils <abindus@wanadoo.fr>
To: linux-kernel@vger.kernel.org
Subject: ISSUE : ppp failure with kernel 2.4.2 - used to work with 2.4.0
Date: Mon, 12 Mar 2001 15:54:00 +0100 [thread overview]
Message-ID: <3AACE307.66677B6A@wanadoo.fr> (raw)
[-- Attachment #1: Type: text/plain, Size: 2736 bytes --]
1 - ppp failure with kernel 2.4.2 - used to work with 2.4.0
2 - Kernel 2.4.2 has been compiled exactly with the same options
(config) as the 2.4.0.
Now when I try to reach my ISP, everything runs well until pppd launch
the serial connection (see the message file attached)
3 - Keywords : kernel ppp
4 - Kernel version : Linux version 2.4.2 (root@a0.abi.org) (gcc version
2.96 20000731 (Red Hat Linux 7.0))
5 - Extract of the /var/log/message file :
Mar 12 14:22:14 a0 ifup-ppp: pppd started for ppp0 on /dev/ttyS2 at
115200
Mar 12 14:22:14 a0 pppd[808]: pppd 2.3.11 started by root, uid 0
Mar 12 14:22:15 a0 WvDial: WvDial: Internet dialer version 1.41
Mar 12 14:22:15 a0 WvDial: Initializing modem.
Mar 12 14:22:15 a0 WvDial: Sending: ATZ
Mar 12 14:22:15 a0 WvDial: ATZ
Mar 12 14:22:15 a0 WvDial: OK
Mar 12 14:22:15 a0 WvDial: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55
+FCLASS=0
Mar 12 14:22:15 a0 WvDial: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Mar 12 14:22:15 a0 WvDial: OK
Mar 12 14:22:15 a0 WvDial: Sending: ATM0L1
Mar 12 14:22:16 a0 WvDial: ATM0L1
Mar 12 14:22:16 a0 WvDial: OK
Mar 12 14:22:16 a0 WvDial: Modem initialized.
Mar 12 14:22:16 a0 WvDial: Sending: ATDT .......................
Mar 12 14:22:16 a0 WvDial: Waiting for carrier.
Mar 12 14:22:16 a0 WvDial: ATDT .................
mar 12 14:22:25 a0 PAM_unix[843]: (su) session opened for user root by
..(uid=....)
Mar 12 14:22:38 a0 WvDial: CONNECT 31200/ARQ/V34/LAPM/V42BIS
Mar 12 14:22:38 a0 WvDial: Carrier detected. Waiting for prompt.
Mar 12 14:22:38 a0 WvDial: Login:
Mar 12 14:22:38 a0 WvDial: Looks like a login prompt.
Mar 12 14:22:38 a0 WvDial: Sending: ..............
Mar 12 14:22:39 a0 WvDial: ..............
Mar 12 14:22:39 a0 WvDial: Password:
Mar 12 14:22:39 a0 WvDial: Looks like a password prompt.
Mar 12 14:22:39 a0 WvDial: Sending: (password)
Mar 12 14:22:39 a0 WvDial: Entering PPP Session.
Mar 12 14:22:39 a0 WvDial: IP address is ............
Mar 12 14:22:39 a0 WvDial: MTU is 1524.
Mar 12 14:22:39 a0 WvDial: Looks like a welcome message.
Mar 12 14:22:39 a0 pppd[808]: Serial connection established.
Mar 12 14:22:39 a0 pppd[808]: ioctl(PPPIOCGFLAGS): Invalid argument
Mar 12 14:22:39 a0 pppd[808]: Hangup (SIGHUP)
Mar 12 14:22:39 a0 pppd[808]: Exit.
6 - at the end of rp3 (or wvdial, same result), pppd aborts ...
7.1 - output of ver_linux : see file attached
7.2 - /proc/cpuinfo : see file attached
7.3 - /proc/modules : no such file (no option module compiled in kernel)
7.4 - /proc/ioport & /proc/iomem : see files attached
7.5 - output of lspci -vvv : see file attached
7.6 - /proc/scsi/scsi : Attached devices: none
Best regards and good luck (many thanks in advance)
Pascal Bonfils / Paris - France
abindus@wanadoo.fr
[-- Attachment #2: lspci.out --]
[-- Type: text/plain, Size: 4773 bytes --]
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e7000000-e77fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:08.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 26)
Subsystem: Tekram Technology Co.,Ltd. DC390F Ultra Wide SCSI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at e7801000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at e7800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at e6000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at e7802000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA])
Subsystem: Palit Microsystems Inc. SiS6326 GUI Accelerator
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e7000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at d000 [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[-- Attachment #3: iomem.out --]
[-- Type: text/plain, Size: 788 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c83ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0bffffff : System RAM
00100000-00240fcb : Kernel code
00240fcc-002adae3 : Kernel data
e0000000-e3ffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
e4000000-e5ffffff : PCI Bus #01
e5000000-e500ffff : Silicon Integrated Systems [SiS] 86C326
e7000000-e77fffff : PCI Bus #01
e7000000-e77fffff : Silicon Integrated Systems [SiS] 86C326
e7800000-e7800fff : Symbios Logic Inc. (formerly NCR) 53c875
e7801000-e78010ff : Symbios Logic Inc. (formerly NCR) 53c875
e7802000-e78020ff : Realtek Semiconductor Co., Ltd. RTL-8139
e7802000-e78020ff : eth0
ffff0000-ffffffff : reserved
[-- Attachment #4: ioport.out --]
[-- Type: text/plain, Size: 854 bytes --]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02e8-02ef : serial(set)
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
d000-d07f : Silicon Integrated Systems [SiS] 86C326
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e000-e01f : usb-uhci
e400-e4ff : Symbios Logic Inc. (formerly NCR) 53c875
e400-e47f : sym53c8xx
e800-e8ff : Realtek Semiconductor Co., Ltd. RTL-8139
e800-e8ff : eth0
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
[-- Attachment #5: cpuinfo.out --]
[-- Type: text/plain, Size: 353 bytes --]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 4
cpu MHz : 233.345
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx
bogomips : 465.30
[-- Attachment #6: ver_linux.out --]
[-- Type: text/plain, Size: 607 bytes --]
-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux a0.abi.org 2.4.2 #2 lun mar 12 14:04:23 CET 2001 i686 unknown
Kernel modules 2.3.14
Gnu C 2.96
Binutils 2.10.0.18
Linux C Library 6 -> libc-2.2.so
Procps 2.0.7
Mount 2.10m
Net-tools (2000-05-21)
Kbd [option...]
Sh-utils 2.0
Sh-utils Parker.
Sh-utils
Sh-utils Inc.
Sh-utils NO
Sh-utils PURPOSE.
next reply other threads:[~2001-03-12 14:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-12 14:54 Pascal Bonfils [this message]
2001-03-12 15:13 ` ISSUE : ppp failure with kernel 2.4.2 - used to work with 2.4.0 Andreas Tobler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3AACE307.66677B6A@wanadoo.fr \
--to=abindus@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.