From: Shawn Starr <spstarr@sh0n.net>
To: linux-kernel@vger.kernel.org
Subject: 2.4.3-pre4: Unable to handle kernel NULL pointer dereference at virtual address 000000fb
Date: Sun, 18 Mar 2001 22:14:31 -0500 [thread overview]
Message-ID: <3AB57997.32AE10F5@sh0n.net> (raw)
In-Reply-To: <200103190207.UAA13397@senechalle.net>
[-- Attachment #1: Type: text/plain, Size: 81 bytes --]
I have included the ksymoops debug and dmesg (both small).. Any ideas?
Shawn.
[-- Attachment #2: debug --]
[-- Type: text/plain, Size: 2284 bytes --]
ksymoops 2.3.7 on i586 2.4.3-pre4. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-pre4/ (default)
-m /boot/System.map (specified)
Intel Pentium with F0 0F bug - workaround enabled.
Unable to handle kernel NULL pointer dereference at virtual address 000000fb
c2016531
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c2016531>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000000 ebx: c0709dc8 ecx: c10e3a60 edx: c1258800
esi: 00000000 edi: 00000082 ebp: c1258878 esp: c0709f54
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)
Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282
c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000
c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>]
Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82
>>EIP; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====
Trace; c20165cf <[aha152x]aha152x_bus_reset+13/a0>
Trace; c019dddf <scsi_try_bus_reset+3f/90>
Trace; c019e427 <scsi_unjam_host+35b/75c>
Trace; c019e8fb <scsi_error_handler+d3/138>
Trace; c010742c <kernel_thread+28/38>
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac>
00000000 <_EIP>:
Code; c2016531 <[aha152x]free_hard_reset_SCs+21/ac> <=====
0: f6 80 fb 00 00 00 10 testb $0x10,0xfb(%eax) <=====
Code; c2016538 <[aha152x]free_hard_reset_SCs+28/ac>
7: 75 70 jne 79 <_EIP+0x79> c20165aa <[aha152x]free_hard_reset_SCs+9a/ac>
Code; c201653a <[aha152x]free_hard_reset_SCs+2a/ac>
9: 8b 4d 00 mov 0x0(%ebp),%ecx
Code; c201653d <[aha152x]free_hard_reset_SCs+2d/ac>
c: 31 d2 xor %edx,%edx
Code; c201653f <[aha152x]free_hard_reset_SCs+2f/ac>
e: eb 0a jmp 1a <_EIP+0x1a> c201654b <[aha152x]free_hard_reset_SCs+3b/ac>
Code; c2016541 <[aha152x]free_hard_reset_SCs+31/ac>
10: 89 ca mov %ecx,%edx
Code; c2016543 <[aha152x]free_hard_reset_SCs+33/ac>
12: 8b 82 00 00 00 00 mov 0x0(%edx),%eax
[-- Attachment #3: dmesg --]
[-- Type: text/plain, Size: 4669 bytes --]
Linux version 2.4.3-pre4 (root@stucko) (gcc version 2.95.3 20010219 (prerelease)) #1 Sun Mar 18 01:29:02 EST 2001
BIOS-provided physical RAM map:
BIOS-88: 000000000009f000 @ 0000000000000000 (usable)
BIOS-88: 0000000001700000 @ 0000000000100000 (usable)
On node 0 totalpages: 6144
zone(0): 4096 pages.
zone(1): 2048 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 83.524 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 166.29 BogoMIPS
Memory: 22124k/24576k available (996k kernel code, 2064k reserved, 382k data, 60k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
CPU: Before vendor init, caps: 0000013f 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 0000013f 00000000 00000000 00000000
CPU: After generic, caps: 0000013f 00000000 00000000 00000000
CPU: Common caps: 0000013f 00000000 00000000 00000000
CPU: Intel OverDrive PODP5V83 stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
isapnp: Scanning for Pnp cards...
isapnp: Card 'Adaptec AVA-1505AI'
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 2 Plug & Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
block: queued sectors max/low 14605kB/4868kB, 64 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
hda: ST3491A D, ATA DISK drive
hdb: QUANTUM PD210A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 836070 sectors (428 MB) w/120KiB Cache, CHS=899/15/62
hdb: 408564 sectors (209 MB) w/32KiB Cache, CHS=873/13/36
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2
paride: epat registered as protocol 0
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Sharing parport0 at 0x378
pda: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1
pda: AVATAR AR2250, master, 489472 blocks [239M], (956/16/32), removable media
pda: pda1
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
eth0: 3c509 at 0x220, 10baseT port, address 00 a0 24 46 41 c0, IRQ 5.
3c509.c:1.16 (2.2) 2/3/98 becker@cesdis.gsfc.nasa.gov.
loop: loaded (max 8 devices)
Serial driver version 5.05 (2000-12-13) with ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16450
ttyS01 at 0x02f8 (irq = 3) is a 16450
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
ip_conntrack (192 buckets, 1536 max)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 20568k swap-space (priority -1)
eth0: Setting Rx mode to 1 addresses.
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x: resetting bus...
aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=10, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.4 $
request_module[scsi_hostadapter]: waitpid(296,...) failed, errno 512
Detected scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type -1
resize_dma_pool: unknown device type -1
aha152x: timer expired
Unable to handle kernel NULL pointer dereference at virtual address 000000fb
printing eip:
c2016531
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c2016531>]
EFLAGS: 00010082
eax: 00000000 ebx: c0709dc8 ecx: c10e3a60 edx: c1258800
esi: 00000000 edi: 00000082 ebp: c1258878 esp: c0709f54
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 297, stackpage=c0709000)
Stack: 00000282 c1258800 00000000 c1274a00 c20165cf c1258800 c1258878 00000282
c1274a00 c019dddf c1274a00 00002003 00000000 c019e427 c1274a00 c0708000
c0709fdc c0709fdc c1258800 c0709fe8 c0709fe8 c10e3a60 00000000 c019e8fb
Call Trace: [<c20165cf>] [<c019dddf>] [<c019e427>] [<c019e8fb>] [<c010742c>]
Code: f6 80 fb 00 00 00 10 75 70 8b 4d 00 31 d2 eb 0a 89 ca 8b 82
next prev parent reply other threads:[~2001-03-19 3:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-19 2:07 /proc/cpuinfo for Intel P4 D850GB asenec
2001-03-19 2:33 ` davej
2001-03-19 3:14 ` Shawn Starr [this message]
2001-03-19 12:02 ` David Weinehall
2001-03-19 21:58 ` 2.4.3-pre4: Unable to handle kernel NULL pointer dereference at virtual address 000000fb Shawn Starr
2001-03-20 17:01 ` Question about memory usage in 2.4 vs 2.2 Josh Grebe
2001-03-20 17:32 ` Jakob Østergaard
2001-03-20 20:29 ` Josh Grebe
2001-03-21 19:16 ` Jan Harkes
2001-03-21 19:54 ` Rik van Riel
2001-03-20 18:54 ` Jan Harkes
2001-03-20 20:29 ` Josh Grebe
2001-03-20 22:18 ` Rik van Riel
2001-03-20 22:29 ` Juha Saarinen
2001-03-21 9:28 ` Zou Min
2001-03-21 9:51 ` Andreas Dilger
2001-03-21 10:56 ` Zou Min
-- strict thread matches above, loose matches on Subject: below --
2001-03-21 10:14 Manfred Spraul
2001-03-21 17:42 ` Josh Grebe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3AB57997.32AE10F5@sh0n.net \
--to=spstarr@sh0n.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.