From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from viemta05.chello.at (viemta05.chello.at [195.34.133.55]) by dsl2.external.hp.com (Postfix) with ESMTP id 01D3E482A for ; Mon, 2 Apr 2001 16:51:34 -0600 (MDT) Received: from dot.at ([62.178.92.247]) by viemta05.chello.at (InterMail vK.4.03.02.00 201-232-124 license 6aea1bd1f01aef5a9a73363c16ebee43) with ESMTP id <20010402225131.HLLS24343.viemta05@dot.at> for ; Tue, 3 Apr 2001 00:51:31 +0200 Sender: chris@dsl2.external.hp.com Message-ID: <3AC90274.4687ED7C@dot.at> Date: Tue, 03 Apr 2001 00:51:32 +0200 From: Christoph Plattner MIME-Version: 1.0 To: parisc-linux@lists.parisc-linux.org Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] New kernel on 720 + Pa-Linux-0.5: Breakpoint ? List-ID: What this in the new kernel ? A manually inserted breakpoint ? Have I to do something in the code to remove ? Output: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 196.1.1.20 Looking up port of RPC 100005/2 on 196.1.1.20 VFS: Mounted root (nfs filesystem) readonly. break 0,0: pid=9 command='init' init[9]: Breakpoint 0 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001001111111100001111 r0-3 00000000 102de010 00000000 00000000 r4-7 00000000 00000000 00000000 00000000 r8-11 00000000 00000000 00000000 00000000 r12-15 00000000 00000000 00000040 10125434 r16-19 13f1c5c0 13f1c000 00000004 00000001 r20-23 102efcc0 102efcc0 10022760 102efcc0 r24-27 0000002e 00001000 00000000 1024c010 r28-31 00000000 00000000 13f1c9c0 10131288 sr0-3 00000000 00000000 00000000 00000001 sr4-7 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 00000000 00000004 IIR: 00000000 ISR: 00000000 IOR: 00000000 ORIG_R28: 00000000 On a kernel a month ago everthing was ok. Now the SCSI problem and system does not boot correctly ! Log below. With friendly regards Christoph P. Soft booted. palo ipl root@didymos.pladom1.at Tue Apr 3 00:25:26 CEST 2001 0/vmlinux 2491775 bytes @ 0x6800 0/palo-cmdline '0/vmlinux HOME=/ TERM=vt100 root=/dev/nfs console=ttyS0' Kernel: partition 0 file /vmlinux ELF32 executable Entry 00100170 first 00100000 n 5 Segment 0 load 00100000 size 1351880 mediaptr 0x1000 Segment 1 load 0024c000 size 175952 mediaptr 0x14c000 Segment 2 load 00278000 size 230488 mediaptr 0x177000 Segment 3 load 002b4000 size 8192 mediaptr 0x1b0000 Segment 4 load 002de188 size 69024 mediaptr 0x1b2188 branching to kernel entry point 0x00100170 PDC Console Initialized Linux version 2.4.0 (root@didymos.pladom1.at) (gcc version 3.0 20010315 (prerelease)) #2 Tue Apr 3 00:28:20 CEST 2001 FP[0] enabled: Rev 3 Model 0 The 32-bit Kernel has started... Determining PDC firmware type: Older Legacy Box setup_cmdline(0x64cc4,0x64cc4,0x0,0x0) PALO command line: 'HOME=/ TERM=vt100 root=/dev/nfs console=ttyS0' PALO initrd 0-0 model 00002000 00000481 00000000 00000000 0234072e 000011f4 00000004 0000000d 00000000 vers 00000003 CPUID vers 0 rev 0 model 9000/720 Total Memory: 64 Mb initrd: 00000000-00000000 pagetable_init On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Searching for devices... Found devices: 1. Coral SGC Graphics (10) at 0xf8000000, versions 0x4, 0x0, 0x77, 0x0, 0x0 2. Cobra Core BA (11) at 0xf082f000, versions 0x4, 0x0, 0x70, 0x0, 0x0 3. Cobra Core SCSI (10) at 0xf0825000, versions 0x4, 0x0, 0x71, 0x0, 0x0 4. Cobra Core LAN (802.3) (10) at 0xf0826000, versions 0x4, 0x0, 0x72, 0x0, 0x0 5. Cobra Core HIL (10) at 0xf0821000, versions 0x4, 0x0, 0x73, 0x0, 0x0 6. Cobra Core RS-232 (10) at 0xf0823000, versions 0x4, 0x0, 0x75, 0x0, 0x0 7. Cobra Core RS-232 (10) at 0xf0822000, versions 0x4, 0x0, 0x75, 0x0, 0x0 8. Cobra Core Centronics (10) at 0xf0824000, versions 0x4, 0x0, 0x74, 0x0, 0x0 9. Cobra (720) (0) at 0xfffbe000, versions 0x200, 0x0, 0x4, 0x0, 0x81 10. Cobra (1) at 0xfffbf000, versions 0x13, 0x0, 0x9, 0x0, 0x0 That's a total of 10 devices. CPU(s): 1 x PA7000 (PCX-S) at 50.000000 MHz Kernel command line: HOME=/ TERM=vt100 root=/dev/nfs console=ttyS0 Error reading tod clock Calibrating delay loop... 49.76 BogoMIPS Memory: 62396k available Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX ASP version 1 at 0xf0800000 found. LED (ASP-style) display at f0800020 registered Found i82596 at 0xf0826000, IRQ 87 early initialization of device eth0 is deferred Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured request_module[parport_lowlevel]: Root fs not mounted lp: driver loaded but no devices found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize 82596.c: MAC of HP700 LAN blindely read from the prom! eth0: Couldn't get consistent shared memory eth0: 82596 at 0xf0826000, 08 00 09 24 64 06 IRQ 87. 82596.c $Revision: 1.15 $ Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) parport_init_chip: enhanced parport-modes not supported. parport0: PC-style at 0xf0824800, irq 88 [PCSPP] lp0: using parport0 (interrupt-driven). SCSI subsystem driver Revision: 1.00 sim700: Couldn't get consistent shared memory sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1 scsi0: Revision 0x0 Post test1, istat 05, sstat0 00, dstat 84 sim700: WARNING IRQ probe failed, (returned 0) scsi0: WARNING: target data areas are not dma coherent! scsi0: test 1 completed ok. scsi0 : LASI/Simple 53c7xx scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID0 scsi0: Unable to send Bus Device Reset for target 0 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID1 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID1 scsi0: Unable to send Bus Device Reset for target 1 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID1 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID2 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID2 scsi0: Unable to send Bus Device Reset for target 2 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID2 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID3 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID3 scsi0: Unable to send Bus Device Reset for target 3 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID3 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID4 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID4 scsi0: Unable to send Bus Device Reset for target 4 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID4 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID5 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID5 scsi0: Unable to send Bus Device Reset for target 5 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID5 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID6 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID6 scsi0: Unable to send Bus Device Reset for target 6 scsi0: Unable to do SCSI bus reset scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<< scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Bad dsp on abort, 0x00057458, offset 0x41858 scsi0: Failed to handle interrupt. Failing commands and resetting SCSI bus and chip scsi0: istat = 04, sstat0 = 00, sstat1 = 00, dstat = 00 scsi0: dsp = 00057458 (script[0x1d16]), dsps = 00057468, target = 0 scsi0: Failing command for ID6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) eth0: link ok. Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 196.1.1.20, my address is 196.1.1.110 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 196.1.1.20 Looking up port of RPC 100005/2 on 196.1.1.20 VFS: Mounted root (nfs filesystem) readonly. break 0,0: pid=9 command='init' init[9]: Breakpoint 0 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001001111111100001111 r0-3 00000000 102de010 00000000 00000000 r4-7 00000000 00000000 00000000 00000000 r8-11 00000000 00000000 00000000 00000000 r12-15 00000000 00000000 00000040 10125434 r16-19 13f1c5c0 13f1c000 00000004 00000001 r20-23 102efcc0 102efcc0 10022760 102efcc0 r24-27 0000002e 00001000 00000000 1024c010 r28-31 00000000 00000000 13f1c9c0 10131288 sr0-3 00000000 00000000 00000000 00000001 sr4-7 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 00000000 00000004 IIR: 00000000 ISR: 00000000 IOR: 00000000 ORIG_R28: 00000000 -- ------------------------------------------------------------------------- private: christoph.plattner@dot.at company: christoph.plattner@alcatel.at