From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from viemta06.chello.at (viemta06.chello.at [195.34.133.56]) by dsl2.external.hp.com (Postfix) with ESMTP id 0A6CF482A for ; Sun, 6 May 2001 14:09:10 -0600 (MDT) Received: from gmx.at ([62.178.92.247]) by viemta06.chello.at (InterMail vK.4.03.02.00 201-232-124 license 6aea1bd1f01aef5a9a73363c16ebee43) with ESMTP id <20010506200907.NRNZ27182.viemta06@gmx.at> for ; Sun, 6 May 2001 22:09:07 +0200 Sender: chris@dsl2.external.hp.com Message-ID: <3AF5AF65.C685635C@gmx.at> Date: Sun, 06 May 2001 22:09:09 +0200 From: Christoph Plattner MIME-Version: 1.0 To: parisc-linux@lists.parisc-linux.org Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] Serial PDC console on 712/601 List-ID: Hello HP hackers ! I have a problem setting the PDC console path to serial. How can be done this on the HP 712/60. On my 9000/720 I can use the `path' command on the PDC console (admin mode). But on the 712/60, the `path' command only sets the boot paths (primary, secondary), but not the console. Is it possible to use the 712/60 with serial console only (no display and keyboard) ? How can I set serial console ? With friendly regards Christoph Plattner -- ------------------------------------------------------------------------- private: christoph.plattner@gmx.at company: christoph.plattner@alcatel.at