From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.alcatel.at (atusks01.alcatel.at [212.183.9.130]) by dsl2.external.hp.com (Postfix) with ESMTP id E06A9482A for ; Mon, 7 May 2001 06:23:08 -0600 (MDT) Sender: christoph.plattner@alcatel.at Message-ID: <3AF69393.F9C5C6E1@alcatel.at> Date: Mon, 07 May 2001 14:22:43 +0200 From: Christoph Plattner MIME-Version: 1.0 To: Matthieu Delahaye Cc: Christoph Plattner , parisc-linux , puffin@esiee.net Subject: Re: [parisc-linux] Serial PDC console on 712/601 References: <3AF5AF65.C685635C@gmx.at> <3AF68199.8CCD7FD2@esiee.fr> Content-Type: text/plain; charset=us-ascii List-ID: Very intersting the method of using the ISL commands to switch over. And I think I also can switch back using this method. Is this correct ? But what is this "dagger" card. Where does the machine store the information ? Flash/EEPROM/battery backuped SRAM ? Can I do a "backup" copy (I have an universial chip programmer at home, and other tools !) ? Can I make such a "dagger" card (whatever it is ? Please give me some hints, before I "risk" the change ! With friendly regards Christoph Plattner ------------------------------------------------------------------ private: christoph.plattner@gmx.at company: christoph.plattner@alcatel.at Matthieu Delahaye wrote: > > Christoph Plattner wrote: > > > > Hello HP hackers ! > > > > I have a problem setting the PDC console path to serial. > > How can be done this on the HP 712/60. > > On my 9000/720 I can use the `path' command on the PDC > > console (admin mode). But on the 712/60, the `path' command > > only sets the boot paths (primary, secondary), but not the > > console. > > > > Is it possible to use the 712/60 with serial console only > > (no display and keyboard) ? > > How can I set serial console ? > > > > With friendly regards > > Christoph Plattner > > > > -- > > ------------------------------------------------------------------------- > > private: christoph.plattner@gmx.at > > company: christoph.plattner@alcatel.at > > > > _______________________________________________ > > parisc-linux mailing list > > parisc-linux@lists.parisc-linux.org > > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux > > >From Pa-RISC/Linux Boot Howto: > > 3.1.2.3.3. How can I change the boot console to serial on a 712? > > Unfortunately, you can't. Although 712s are configured for in-house > HP development to use serial console, this configuration > isn't supported in the field. You have to use a graphics console for > 712s. > > http://www.oswg.org/oswg-nightly/oswg/en_US.ISO_8859-1/articles/ > parisc-linux/parisc-linux-boot/ > > But it seems you can, after dangerous manipulations: > > http://lists.parisc-linux.org/pipermail/parisc-linux/1999-December/008117.html > > regards, > Matthieu > > -- > Matthieu Delahaye > ESIEE Team > http://mkhppa1.esiee.fr/ > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux ------------------------------------------------------------------ private: christoph.plattner@gmx.at company: christoph.plattner@alcatel.at