All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tim Moore <timothymoore@bigfoot.com>
To: kernel <linux-kernel@vger.kernel.org>
Subject: ncr53c8xx - DAT detection problem - 2.2.14-5
Date: Thu, 10 May 2001 19:32:52 -0700	[thread overview]
Message-ID: <3AFB4F54.9D63FC3F@bigfoot.com> (raw)

Any clues as to why /dev/st0 is never initialized for DAT tape?  Please cc nicklong@home.com if more
info is needed.

rgds,
tim.
...
ncr53c8xx: at PCI bus 1, device 9, function 0
ncr53c8xx: 53c876 detected 
ncr53c8xx: at PCI bus 1, device 9, function 1
ncr53c8xx: 53c876 detected 
ncr53c876-0: rev=0x14, base=0xc6ffdf00, io_port=0x3000, irq=5
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6fff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6ffde00, io_port=0x3400, irq=9
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6ffe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2a-2
scsi1 : ncr53c8xx - version 3.2a-2
scsi : 2 hosts.
  Vendor: COMPAQ    Model: BD0096349A        Rev: 3B05
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: COMPAQ    Model: BD0096349A        Rev: 3B05
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 8
ncr53c876-0-<1,0>: tagged command queue depth set to 8
  Vendor: SEAGATE   Model: DAT    04106-XXX  Rev: 735B
  Type:   Sequential-Access                  ANSI SCSI revision: 02
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
 sda: sda1 sda2 < sda5 >
ncr53c876-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
 sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
...

/sbin/lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(AGP disa
bled) (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at <unassigned> (32-bit, prefetchable)

00:0b.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) (prog-if 00
[VGA]
)
        Flags: medium devsel
        Memory at c4000000 (32-bit, prefetchable)
        Memory at c6dff000 (32-bit, non-prefetchable)

00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 04)
(prog-if 00 [Normal decode])
        Flags: bus master, medium devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        Capabilities: [dc] Power Management version 1

00:0e.0 System peripheral: Compaq Computer Corporation: Unknown device a0f0
        Subsystem: Compaq Computer Corporation: Unknown device b0f3
        Flags: medium devsel
        I/O ports at 1800
        Memory at c6dfdf00 (32-bit, non-prefetchable)

00:12.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
        Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at c6dfe000 (32-bit, non-prefetchable)
        I/O ports at 2000
        Memory at c6e00000 (32-bit, non-prefetchable)
        Capabilities: [dc] Power Management version 2

00:14.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

00:14.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at f100

00:14.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)(prog-if 00 [UHCI])
        Flags: medium devsel
        I/O ports at 5800

00:14.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
        Flags: medium devsel

01:07.0 Network controller: Compaq Computer Corporation ProLiant Integrated Netelligent 10/100 (rev
10)
        Flags: medium devsel
        I/O ports at 5820

01:09.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
        Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI Controller
        Flags: bus master, medium devsel, latency 255, IRQ 5
        I/O ports at 3000
        Memory at c6ffdf00 (32-bit, non-prefetchable)
        Memory at c6fff000 (32-bit, non-prefetchable)

01:09.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
        Subsystem: Compaq Computer Corporation Embedded Ultra Wide SCSI Controller
        Flags: bus master, medium devsel, latency 255, IRQ 9
        I/O ports at 3400
        Memory at c6ffde00 (32-bit, non-prefetchable)
        Memory at c6ffe000 (32-bit, non-prefetchable)


--

             reply	other threads:[~2001-05-11  2:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-05-11  2:32 Tim Moore [this message]
2001-05-11  7:45 ` ncr53c8xx - DAT detection problem - 2.2.14-5 Geert Uytterhoeven
2001-05-12  4:16   ` Nick Long

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3AFB4F54.9D63FC3F@bigfoot.com \
    --to=timothymoore@bigfoot.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicklong@home.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.