From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from puffin.external.hp.com (puffin.external.hp.com [192.25.206.4]) by dsl2.external.hp.com (Postfix) with ESMTP id 7A6B6482A for ; Tue, 5 Jun 2001 06:25:29 -0600 (MDT) Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id GAA18466 for ; Tue, 5 Jun 2001 06:17:47 -0600 From: jheumann@fonts.de Sender: jheumann@mailserv2.iuinc.com Message-ID: <3B1CB312.1C9DBAB9@fonts.de> Date: Tue, 05 Jun 2001 12:23:14 +0200 MIME-Version: 1.0 To: parisc-linux@thepuffingroup.com Subject: [parisc-linux] 0.9ser can't install on D210 Content-Type: text/plain; charset=us-ascii List-ID: please help, i can't load linux pa-risc 0.9seriell on my HP9000/D210. Why? (HP-UX 10.20 is running....) Jan Heumann jheumann@fonts.de ----------------------------------------------------- Main Menu: Enter command > search Searching for potential boot device(s)... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Path Number Device Path (dec) Device Type ----------- ----------------- ----------- P0 4.5 Random access media P1 4.8 Random access media P2 16/5.2 Random access media P3 16/6.0 LAN Module Main Menu: Enter command > boot p2 Interact with IPL (Y or N)?> n Booting... Boot IO Dependent Code (IODC) revision 1 IPL error: bad IPL checksum. Error Reading IPL Main Menu: Enter command > search Searching for potential boot device(s)... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Path Number Device Path (dec) Device Type ----------- ----------------- ----------- P0 4.5 Random access media P1 4.8 Random access media P2 16/5.2 Random access media P3 16/6.0 LAN Module Main Menu: Enter command > boot p2 Interact with IPL (Y or N)?> y Booting... Boot IO Dependent Code (IODC) revision 1 IPL error: bad IPL checksum. Error Reading IPL -------------------------------------------------------- information all PROCESSOR INFORMATION HVERSION SVERSION CVERSION Speed Model Model/Op (Revision) --------- -------- -------- ---------- 100 MHz 0x4840 0x0481 12 HSC Bus Speed (in MHz) : 33 Software ID (dec) : 2009187834 Software ID (hex) : 0x77c1c5fa Software Capability : 0xf0 COPROCESSOR INFORMATION Coprocessor Coprocessor Coprocessor Model Revision State ----------- ----------- ------------- 0x0000000d 1 Functional CACHE INFORMATION Instruction Cache Size Data Cache Size ----------------------- --------------- 128 KB 128 KB MEMORY INFORMATION Slot Card Size Amount Enabled ---- --------- -------------- 0 64 MB 64 MB 1 64 MB 64 MB 2 64 MB 64 MB 3 64 MB 64 MB 4 64 MB 64 MB 5 64 MB 64 MB Physical Memory: 384 MB (0x18000000) Configured Memory: 384 MB (0x18000000) I/O MODULE INFORMATION IODC IODC Path (dec) Type Slot Mod HVERSION SVERSION Vers Dep ---- ---- ---- --- -------- ---------- ------ ------ 4 A DMA I/O 1 0 0x0131 0x00008980 0x07 0x00 16 Bus Adapter 4 0 0x02e0 0x00008100 0x00 0x00 16/4 Built-in RS232 1 0 0x02e0 0x00008c00 0x01 0x00 16/5 Built-in SE SCSI 1 1 0x02e0 0x00008200 0x01 0x00 16/6 Built-in LAN 1 2 0x02e0 0x00008a00 0x02 0x00 16/0 Built-in Parallel 0 0 0x02e0 0x00007400 0x00 0x00 16/7 Built-in Keyboard 1 3 0x02e0 0x00008400 0x00 0x00 16/8 Built-in Mouse 2 0 0x02e0 0x00008400 0x00 0x00 20 Bus Adapter 5 0 0x0300 0x00008e00 0x00 0x00 20/2 RS232 Port 0 2 0x0300 0x00008c00 0x01 0x00 20/5 Bus Adapter 1 1 0x0300 0x00009000 0x00 0x00 Hot Swap module is present. EISA Cards Path Type EISA ID ---- ---- ------- 20/5/1 EISA card 0x25d00400 20/5/2 EISA slot is empty 20/5/3 EISA slot is empty 20/5/4 EISA slot is empty BOOT INFORMATION Autoboot: ON Autosearch: ON Fastboot: OFF Primary boot path: 4.8 (dec) 04.8 (hex) Alternate boot path: 16/5.2 (dec) 10/05.2 (hex) Console path: 16/4.0 (dec) 10/04.0 (hex) Keyboard path: 16/7.0 (dec) 10/07.0 (hex) LAN Station Address: 080009-af13c8 Mon Jan 5 21:15:36 GMT 1970 (19:70:01:05:21:15:36) FIRMWARE INFORMATION Firmware Version: 36.34 CHIP REVISIONS Module Revision ------ -------- System Board 0 Processor Board 2 PA 7100LC 12 Firmware 20 Fast/Wide SCSI Board 1 Multifunction I/O Controller 0 EISA Interface 0 WARNINGS No warnings to report. Information Menu: Enter command >