From: Vipin Malik <vipin.malik@daniel.com>
To: ashwinp@aftek.com
Cc: linux-mtd@lists.infradead.org
Subject: Re: Is my flash being detected?
Date: Fri, 22 Jun 2001 09:42:58 -0500 [thread overview]
Message-ID: <3B335971.27EBD23D@daniel.com> (raw)
In-Reply-To: 993219781.58250@email.aftek.com
Make sure that you have included the cfi_cmdset_002.c module.
Vipin
ashwinp@aftek.com wrote:
> Hi freinds,
> I am trying to use mtd on L7205sdb.The flash chip used is AM29LV160DB.
> The flash size is 16 MB in byte mode and processor data bus being 32 bits wide.
> The .config for MTD is as below
> CONFIG_MTD=y
> CONFIG_MTD_DEBUG=y
> CONFIG_MTD_DEBUG_VERBOSE=3
> CONFIG_MTD_CFI=y
> CONFIG_MTD_CFI_AMDEXT=y
> CONFIG_MTD_ROM=y
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_START=000000
> CONFIG_MTD_PHYSMAP_LEN=10000
> CONFIG_MTD_PHYSMAP_BUSWIDTH=4
>
> It does say that AMd flash found but at the end it complains that
> "cfi_probe: No supported Vendor Command Set found"
>
> Given below are my bootup messages
>
> Linux version 2.2.1-rmk2 (root@localhost.localdomain) (libraries: /usr/local/arm/lib/gcc-lib/arm-linux/egcs-2.91.66/:/usr/lib/gcc/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/) #916 Fri Jun 22 17:51:46 IST 2001
> start_kernl: Before setup_arch, 00000000-00000000
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2001-06-22 14:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-22 14:23 Is my flash being detected? ashwinp
2001-06-22 14:42 ` Vipin Malik [this message]
2001-06-22 15:49 ` ashwinp
2001-06-22 16:04 ` David Woodhouse
2001-06-22 14:45 ` Vipin Malik
2001-06-22 14:44 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B335971.27EBD23D@daniel.com \
--to=vipin.malik@daniel.com \
--cc=ashwinp@aftek.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.